ECKOUSTIC CORRECTIONAL PANELS

Eckoustic^® Correctional Panels (ECPS)

Panel facings shall be fabricated of 16 gauge zinc coated steel, perforated 3/32" holes on 3/16" staggered centers. Panels shall be flat faced with all edges returned. Panels shall be surface mounted to the walls or ceiling. A minimum of four 11 gauge mounting angles shall be provided with each panel. Each mounting angle shall be provided with 1/4" - 20 blind threaded inserts for attachment of the panel. Panels are attached to the mounting angles with 1/4" - 20 button head socket security cap screws made of 18-8 stainless steel. Mounting angles shall be hidden beneath the panels and attached to the mounting surface with appropriate anchors. Acoustical insulation shall be 2" thick fine fibered, fibrous glass having a density of not less than 1.5 lbs. per cu. ft. Acoustical insulation shall be wrapped in 2 mil. polyethylene.

ECPs are offered in standard sizes of 18" wide by 5', 6', 8' and 10'. 

Extremely rugged 2" thick flat sound absorbing panels with special security fastening system

• Convenient installation
• No need to relocate existing utilities
• Quality engineered surface mounting system incorporating hidden mounting angles and special security fasteners
• Suitable for corridors, cell blocks, gymnasiums, and various other areas within jails and detention centers.

Continuous acoustic treatment with extra strong 2" thick acoustic panels

• Quick installation of the 18" x 8' long ceiling modules
• Specially designed to conceal utilities while still allowing access to these systems
• Effective, uncomplicated procedure for reducing excessive stress-inducing noise

ECKEL Industries, Inc.
Acoustic Division
155 Fawcett Street
Cambridge, MA 02138
Telephone: (617) 491-3221
FAX: (617)547-2171
E Mail: eckel@eckelacoustic.com
www.eckelacoustic.com