Use as many modules as required for your display (Consult factory for more than three modules.)

Electrosonic's 2XVIEW™ is a self-contained display that conveniently and efficiently houses the powerful Electrosonic processor, which is powered by Electrosonics' PICBLOC™ technology. This unique design, which results in an extremely small footprint, allows the upper projector to be nestled above the lower projector, with the Electrosonic processor located in the base of the display. This system will provide the big and bright imagery you require, without the space that most systems demand.

As for its superb technical capabilities, the 2xView is able to professionally display four separate individual pictures, while still allowing any one of them to be magnified.

Features

• Front accessible components for easy setup and service, also provides for installation   against site walls.
• Shallow depth results in easy placement. Angled screen provides optimal imaging at all viewing distances.
• Modular system allows for 2x1, 2x2, and 2x3 walls, depending on your needs.
• View multiple sources (4 per 2x2, 6 per 2x3), or select 1 for viewing across entire wall. 2x3), or select 1 for viewing across entire wall. 2x3 is also capable of displaying a 2x2 magnification of one source, while displaying alternate sources on remaining screens.
• Unique 2x3 configuration permits viewing of letterboxed format videos without black bars across top & bottom of picture.
• Selectable magnifications.
• Effects sequence via internal program, or Electrosonic's control products via PICBOX™, VCU, C-THROUGH™, etc.
• Built-in equipment rack space in each module.
• Digital control of set-up functions.

Projection

One projector per screen, rear projection, using three monochrome (Red, Green, Blue) high output CRT's.

Screen

Size: 53" diagonal (134.62 cm)

106" diagonal for 2x2 (269.24 cm)

Image Center: Eye level

Mullion: .19" per screen (.074 cm)

Gain: 6.5, two piece, high contrast black stripe lenticular with fresnel lens.

Processing

Electrosonic processor with digital comb filter and digital decoder, plus full third interlace motion interpolation. Accepts up to four separate NTSC inputs with full magnification available on any one selected input.

Remote Control

Integrated infrared remote control that allows individual or multiple projector control. The remote also controls display of single images as well as magnifications. Wired RS232 serial control also available. All convergence and color adjustments are made via remote control.

Mechanical

Enclosure: Laminated wood, simple site assembly

Height: under 8 feet (243.8 cm)

Depth: under 3 feet (91.4 cm)

Weight: under 475 lbs. (213.7 kg)

Servicing

With all components being front accessible, the 2xView is unbeatable when it comes to servicing the system. To service the projectors, simply remove the screen. The Electrosonic processor is located conveniently in the lower half of the system - remove the front panel to access the processor. Servicing has never been easier!

When it comes to complete service for your 2xView, reliability is important, therefore, with every 2xView purchase, a one-year warranty is provided. Additionally, service contracts are available so that all service calls are supported 365 days a year by a qualified Electrosonic technician.

Electrosonic prides itself on its extensive and global service network. No matter where your 2xView system is located, Electrosonic can be there to assist and correct the problem - allowing you to display your big, bright images as only the 2xView can.