architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share
  Electrosonic   Electrosonic Products  

Pro Digital - Page 17

   

Electrosonic Products

Vector™
elec17c.jpg (9848 bytes)
Card cage format gives flexibility and room for future expansion. Electrosonic convolver image re-sizing technology eliminates blocky pixels. Integral power and cooling. Connector cards separate cables from the main processing cards. C-Through 2 for Windows.

 

Specification

Inputs

Number: 2 independent channels per input card Up to 4 input cards (8 sources) per card cage Up to 8 card cages (64 sources) per system
Display Capability: Each input channel is completely independent, and may carry and supported source type. Each channel can have its source displayed on any output at a single or multiple magnifications (one minification size per input channel). All source update rates are synchronized to 50Hz or 60Hz.
Format: PAL/NTSC composite and S-Video YPbPr/RGB component video 525 / 60Hz, 625 / 50 Hz
Computer graphics from 640 x 480 to 800 x 600 at 72Hz (<60MHz dot clock) (higher resolutions through optional hi-res input card)
Sync type: Separate H & V, composite and sync on green
Connector: 5 x BNC per channel
Synchronization: All sources are frame synchronized to one of
  1. Selected source
  2. Internal sync
  3. External video sync input/another Vector
Outputs
Number: 4 channels per output card
Up to 9 output cards (36 outputs) per card cage
Up to 8 card cages (288 outputs) per system
Display capability: Each output can display 2 windows that may contain the same or different sources at any size from a few pixels to 16 times the original size.
Format: 0.7V analog RGB 15.62 - 62.5kHz
50/60/100/120Hz
Interlaced or progressive scan
(max fv at 800 x 600 resolution is 60Hz)
Controls: Brightness, contrast, saturation, overscan
Control
On-board: Front panel LCD user interface
Internal show store
8 contact closure show start inputs
Computer: C-Through 2 for Windows (Windows 95/NT)
- Status feedback to computer
- Control of source equipment
- Compatible with Eslinx™ and ES5003 for source control
RS232 control from touch panels and other controllers.
Effects Minifications and magnifications, washes, freezes, dynamic window movement sizing and zooming, fades, internal logo store (not restricted to screen boundaries)
Set-up Auto-sensing of input types
Soft-addressed outputs for random cabling
Front panel interface, internal test pattern store
Physical
Size: 431mm (W) x 440mm (D) x 44mm / 10U(H);
17" (W) x 18.1" (D) x 17.5" / 10U(H)
Weight: Card cage: 17kg; 37lbs
Each card: 1.1kg; 2.2lbs
Ambient 5°C to 35°C; 41°F to 95°F
temperature:
Ambient 85% maximum (non condensing)
humidity:
Power
Voltage: 90-264V ac at 50 - 60 Hz
Connector: 3 pin IEC
Consumption: 1 kW maximum
Conformance Designed for UL 1950 and CE Marking
Order codes
Main components: ES5951 Card frame (including System manager)
ES5953 4 channel video/SVGA output card
ES5954 2 channel video/SVGA input card
Spares: ES5951/F Replacement cooling fan
ES5951/P Replacement power supply
ES5951/M User guide
ES5951/C1 1 slot blanking plate
ES5951/C3 3 slot blanking plate
ES5952 System manager card
ES5952/C Connector card for ES5952
ES5953/C Connector card for ES5953
ES5954/C Connector card for ES5954
Accessories: ES5960 Cross-over RJ45 cable
ES5965 9 pin to 6 pin adaptor
ES5952/B Button board & cable
ES5953/C2 Duplicate output connector card

elec17f.jpg (5489 bytes)

Minneapolis

10320 Bren Road East, Minnetonka, MN 5343

Tel: +1.612.931.7500 Fax: +1.612.938.9311

E-mail: videowall@electrosonic-mn.com

London

Hawley Mill, Hawley Road, Dartford, Kent DA2 7SY

Tel: +44(0)1322.222211 Fax: +44(0)1322.222211 Fax: +44(0)1322.282282

E-mail: products@electrosonic-uk.com

Burbank

3320 North San Fernando Blvd., Burbank, CA 91504 Tel: +1.818.566.4923

E-mail: systems@electrosonic-ca.com

Hong Kong

Room 603 Wilson House, 19-27 Wyndham Street, Central, Hong Kong

Tel: +852.2525.1828 Fax: +852.2877.5811

E-mail: avwall@electrosonic-hk.com

Toronto

94 Scarsdale Road, North York, Ontario M3B 2R7

Tel: +1.416.449.5131

E-mail: videowall@electrosonic-mn.com

Web site: www.electrosonic.com

Vector, C-Through, WorkSurface, Eslinx are trademarks of Electrosonic Ltd.

© 1998, Electrosonic



Request for Information / Request a Catalog from Electrosonic
 
 
 
To request more information from Electrosonic, please complete the form below.
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.