ELITE ACCESS SYSTEMS' RESIDENTIAL, MECHANICAL, LINEAR GATE OPERATOR

Function & Form	450 LBS TORQUE

ELECTRONIC SPECIFICATIONS

• RUNNING SYSTEM - Microcontroller with built in watchdog system
• MODULAR BOARD - Uses LEDs to indicate all input and output functions of the gate operator including motor error.
• SENSOR - Causes the gate to stop when it makes contact with an object while opening or closing.
• TIMER - Can be set from 0 - 60 seconds, or can function as a "push-open/stop/close" type of operation.
• MASTER/SLAVE - Dictates synchronized movement between two gate operators.
• SAFETY LOOP INPUT -  Anti-tailgaiting system uses a "stop only" method of operation. Will not work as a commercial loop system.
• ALARM OUTPUT - Can be interfaced with any home alarm system. Alarm will sound if the gate is forced open. Optional siren speaker can be installed within the Elite Actuator - 1 control box.
• SPIKE SUPPRESSORS - Equipped with LCR filter and spike suppressor for maximum protection.
• ALTERNATE OUTPUTS - Mater/Slave, alarm system and magnetic lock interface.
• ELECTRONIC INPUTS - Any type of radio receiver, full-control system "push-open/stop/close", safety loop, photocell, telephone entry and key switch.
• HOUSING DIMENSIONS - L 10.5" - W 4.25" - H 12"
• HOUSING FINISH - Gold zinc plated, sheet metal box is powder coated for rust resistance.

FEATURES AND OPERATION

OPEN OUTSIDE

The Actuator-1 can be installed inside the property to swing open to the outside and close to the inside.

OPEN INSIDE

The Actuator-1 can be installed inside the property to swing open to the Inside and close to the outside as well.