Architect’s Specification

All Rubber Flooring shown on the finish schedule or otherwise listed herein shall be
Endura Rubber Flooring, Two University Office Park, 51 Sawyer Road, Waltham, MA 02254.

Endura Rubber Flooring shall comply with ASTM F-1344 for tile, and Federal Specification RRT-650-D for treads, and meet ASTM E648 Class I Fire Rating Standards.  All Endura Rubber Flooring shall be (specify: Round, Square, Domino or Sculptured) profiles, in 18¹/8" x 18¹/8" size and .125" (3.18 mm) thickness in the Endura Solid Color and/or Flecksibles.
(Note: Flecksibles color choices are premium colors.)

Endura Limited Wear Warranty

Endura products are warranted to be free from defects in material and workmanship at the time of shipment. Written notice of any claimed defect must be received by Endura within one year after the date of installation.   Endura Rubber Flooring tiles are further warranted against excessive wear under normal usage in recommended applications for a period of ten (10) years and for a period of five (5) years on treads.

ENDURA^® MAKES NO WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Limitation on Liability: The obligation of Endura, and Buyer’s sole remedy under its Limited Wear Warranty is the supply of replacement flooring tiles for the failed material from regular product inventory lines. Endura shall not be liable for labor or for any other costs incurred in the repair or replacement of flooring tiles, nor shall Endura be liable for any special, indirect, incidental or consequential damages.
For a copy of the Warranty Statement, contact Endura or your Endura distributor.

Complete ready-to-use Rubber Flooring and Stair Tread specifications available on request.

Important

1.  Endura adhesives must be used for the Endura Warranty to apply. See the Endura installation instructions.

2.  Proper maintenance on a regular basis with recommended cleaning solutions is essential to the appearance of the tile, the functioning of its waxes and to the wear-life of the product.

3.  Endura tiles may have slight color variations which may not be detected at the manufacturing level. All tiles must be dry laid and examined for color acceptance before being cemented to the subfloor (see Endura installation instructions).

4.  Heavy sunlight penetration from direct or glass filtered sources may cause fading.

5.  Certain chemicals and various substances normally attack standard rubber formulations.  Endura should not be used in commercial kitchens and areas where impregnation from cooking oils, vegetable fats, etc. is likely to occur. If any particular chemicals or substances are going to be present in the environment, adequate testing should be performed in advance to ensure Endura’s suitability for such applications.

6.  For outdoor applications, call for information on limitations and precautions.

A division of The Biltrite Corporation

2 University Office Park
51 Sawyer Road, P.O. Box 9045
Waltham, MA 02254-9045

(800) 643-7463
(781) 647-5375
Fax
(781) 647-4543

http://endura-flooring.com
e-mail: sales@endura-flooring.com