architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share
  FE Petro   FE Petro Products  

FE Petro Products - Page 16

   

FE Petro Products

FE PETRO FEATURE

VERTICAL DISCHARGE:

Another unique feature of FE Petro. Provides for a simple connection to underground piping.

         

BENEFIT TO YOU

This unique FE Petro feature allows for fewer fittings to connect the pump to the discharge line, and requires less space in the sump.
         

FE PETRO FEATURE

SIMPLE SERVICING:

If ever required, the pump can be easily removed from the tank by unthreading three bolts. There is no need to disconnect the syphon system, or remove the leak detector from the system to service the IST.

BENEFIT TO YOU

This feature reduces the risk of correcting one problem and causing another.
         

FE PETRO FEATURE

INTELLIGENCE:

The Variable Frequency Controller has continuous running diagnostics and displays system conditions on the controller.

  • Dry Running
  • Low Incoming Voltage
  • Locked Rotor in Pump
  • Open Circuit between Controller and Motor
  • Short Circuit between Controller and Motor
  • Thermal Overload in Controller
  • Controller capacitors failing

BENEFIT TO YOU

Immediate, easily understood, display of system conditions.
         

FE PETRO FEATURE

SERIAL COMMUNICATION:

Incorporates a RS 485 serial communications system for easy integration or remote monitoring.

BENEFIT TO YOU

System integration with other electronic monitoring equipment.
         

IST SYSTEM SPECIFICATIONS:

Power Requirements:
  • Variable Frequency Controller Input Power
  • 200/250 Volt, 1 or 3 phase, 50 or 60 Hz

  • Motor
  • Three Phase, Power provided by variable frequency controller.

  • Pump Motor:
  • 2 HP, 2 stage centrifugal pump
  • Maximum liquid viscosity:
  • 70 SSU at 60 deg F, capable of pumping ballast water from underground tanks.

  • Maximum flow rate - 100 GPM at full flow
  • Maximum Pressure - 126 feet of head (42 PSI in gasoline)
  • Maximum Amperage - 9 amps at full load

Check Valve:

  • 2-3/4" (70mm) diameter constructed of Alcohol compatible alodined aluminum and steel with fluorocarbon seal.

Pressure Relief Valve:

  • Set to relieve static line pressure at 40-50 PSI, reseals above 20 PSI.

Seal Elastomers:

  • All wetted seals are Fluorocarbon.

Syphon:

  • Syphon Primer is venturi type, capable of 26" Hg vacuum
  • Syphon Check Valve is machined aluminum, field repairable

Variable Frequency Controller Size:

  • Enclosure Size is 5-1/8" wide by 10" high by 8-1/4" deep

Alcohol/Gasoline Compatible:

  • A standard feature. The IST will handle any mixture of alcohol in gasoline, up to 100% methanol or ethanol, and up to 20% MTBE, 20% ETBE, or 17% TAME.

Approvals:

  • UL, other pending

Quality Certification:

  • FE Petro is an ISO 9001 Certified manufacturer.



Request for Information / Request a Catalog from FE Petro
 
 
 
To request more information from FE Petro, please complete the form below.
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.