FEATURE |
OPEN CIRCUIT DETECTION: |
| Detects an open circuit between
motor and controller. Condition is indicated on flashing red light alerting service
technician to the cause of the problem. |
BENEFIT |
|
| Reduces service
cost by quickly defining the cause of trouble to the service technician. |
| |
FEATURE |
LOW VOLTAGE DETECTION: |
| Detects low voltage conditions
that cause excessive heat in motor. Condition is detected and pump automatically shuts
off. Once voltage returns to operating range, the STP-SC auto resets allowing motor to
run. |
BENEFIT |
|
| Extends motor
life by eliminating progressive heat damage to motor windings. |
| |
FEATURE |
PUMP MOTOR FAILURE DETECTION: |
| Signals locked rotor in pump
motor by flashing red light. |
BENEFIT |
|
| Reduces service
time by immediately alerting service technician to cause of problem. |
| |
FEATURE |
REMOTE DIAGNOSTIC CAPABILITY: |
| ALL STP-SC controllers are
equipped with an RS485 serial communication port to facilitate on site and remote
communications of all diagnostic functions for future site integration. |
BENEFIT |
|
| Provides the
future opportunity for service personnel to determine the "fault" prior to
arriving at the site, assuring the availability of parts and technical support on the
first service call. This reduces the chance of multiple service visits to correct a pump
problem, thereby reducing service costs and downtime. |
| |
COMPARE THE STP-SC CONTROLLER FEATURES TO STANDARD SUBMERSIBLE PUMP
CONTROL BOXES. |
| FEATURE |
STP-SC SMART CONTROLLER |
STANDARD CONTROL BOX |
| Dry Run Protection |
Yes |
No |
| Low Voltage Detection |
Yes |
No |
| Pump Motor Failure Detection |
Yes |
No |
| Open Circuit Detection |
Yes |
No |
| Extended Pump Run Detection |
Yes |
No |
| Slave Pump Auto Start Operation |
Yes |
No |
| Auto Sequencing of
Manifolded Pumps |
Yes |
No |
| Fault Diagnostic Lights |
Yes |
No |
| Pump Operating Light |
Yes |
No |
| High Voltage Surge Protection |
Yes |
No |
| Power "ON" light |
Yes |
Yes |
| External Run Light Provision |
Yes |
Yes |
| Pump Power "OFF"
Provision |
Yes |
Yes |
| Compatible with 1/3, 3/4 & 1-1/2 HP STP's |
Yes |
Yes |
| 30 Amp Line Contractor Relay |
Yes |
Yes |
|
| |
SPECIFICATIONS: |
|
|
OTHER
STANDARD FEATURES: |
- "Power off" to the submersible is accomplished by
removing the front cover of controller (Power supply Lock-Out and Tag-Our still required
for servicing)
- "Pump on" indication is provided by flashing green
light
- Provision for remote "pump on" pilot light
- Built-in voltage surge protection
- Flashing yellow light indicates RS485 is communicating
- RS485 com port
|
| SETTING THE STANDARD IN
SUBMERSIBLE TECHNOLOGY... |
