SECTION 15360

CARBON DIOXIDE EXTINGUISHING SYSTEMS

1.04 SUBMITTALS

1. Product Data: Submit product data under the provisions of Section [01300.] [01340.]
2. Shop Drawings: Submit drawings under the provisions of Section [01300.] [01340.]
3. Quality Control Submittals:

1. Design Data: Submit design calculations under the provisions of Section [01300.] [01340.]
2. Manufacturer’s Instructions: Submit manufacturer’s instructions for system maintenance and recharge under provisions of Section [01300.] [01360.] [01700.] [01730.]

1.05 QUALITY ASSURANCE

1. Qualifications:

1. Manufacturer: The manufacturer of the system components shall have a minimum of 10 years experience in the manufacture and design of specialized fire suppression systems and related fire detection and control equipment.
2. Installer: The installer shall be authorized and trained by the manufacturer to design, install and maintain carbon dioxide fire suppression systems.

2. Regulatory Requirements:

1. Conform to [applicable] [ ____ ] building code for requirements specified herein.
2. Codes and Permits: Conform to the local code requirements applicable to this section. Obtain and pay any necessary permits prior to beginning work involved in this section.
3. All system components must be U.L. listed.

1. Acceptance at Job Site:

1. Deliver materials to job site in sealed, original containers bearing the manufacturer’s labels.
2. Materials arriving at the job site without labels, opened or damaged shall not be accepted for use.

2. Storage and Protection:

1. Store, protect and handle products at the job site under provision of Section [01600.] [ ______.]
2. Materials shall be stored in a well ventilated area at temperatures between 32° F and 130° F (0° C and 54° C).

1. Coordinate work performed under this section with work specified in Section [13900.] [16720.] [ ________.]

1. Maintenance Service: Shall be provided by an authorized, factory trained representative in accordance with the manufacturer’s recommendations.