MULTI-SLIDE / POCKET DOORS
(Non-Thermally Broken Sliding Glass Doors)
Standard Configurations: XX  XXX  OXX  OXXX  OXXXXO  PX   PXX  PXXXXP

SOME FEATURES OF THE NORWOOD M/S SERIES 3050

DELUXE TANDEM ROLLER ASSEMBLIES    Each panel rolls effortlessly on two Maxi-Tandem assemblies, each having two 13/4" steel rollers with ball bearings, fully adjustable, pre-lubricated and sealed for life.

HOLLOW EXTRUDED VERTICALS  The vertical lead stiles and interlockers are all hollow extrusions, engineered for strength and rigidity so they will not pull off the glass or twist in your hand.

STAINLESS STEEL TRACK  The heavy gauge stainless steel track snaps into the recess in the threshold. This assures smooth rolling panels and long life for the threshold and rollers.

FLUSH THRESHOLD  The track is 1/2" high, conforming to ADA requirements.

FLUSH HARDWARE  The latch is a high security triple-action mortise type latch. The inside and outside handles are recessed to allow panels to bypass or stack flush.

GLAZING   The glazing capacity is 1" for insulated glass, or you may select single glass 3/16" or 1/4". (Also available K/D, no glass.)
Note: The Series 3050 Multi-Slide (Mall Front) is not intended to be used in an exterior application.

PRODUCT DESCRIPTION   The Norwood M/S Series 3050 utilizes the panels from the Norwood Series 3000 and combines them with a flush track system that allows unlimited versatility in the creation of multiple sliding and pocket doors for commercial and residential projects.

PERFORMANCE RESULTS   Not AAMA or NFRC rated.