Sliding Glass Doors (Fleetwood Aluminum Products Inc.)

PRODUCT STRENGTH! Fleetwood's original designs were primarily intended for the custom home owner. Over the past thirty plus years we have developed our product lines so that they qualify for light, medium, and heavy commercial projects as well as custom residential. In order to qualify for commercial ratings, the products must be made better and stronger so they will perform under extreme weather conditions. This gives the home owner the assurance that his Fleetwood windows and doors will stand the test. They have been proven in the toughest market... commercial.
Nor. #9226 Standard on Series: 3300, 3033-TI, 3000 Optional on: None	Flt. #120-B Standard on Series: 1030-T, 1000, 900, 830-T, 800 Optional on: 3300-T, 3303-TI, 3050, 3000,1050		Flush #910 Standard on Series: 3050,1050 Optional on: 3300-T, 3033-TI, 3000, 1030-T, 900, 830-T, 800
Parkplace #2235 Standard on None Optional on: 3300-T, 3033-TI, 3050, 3000, 1050, 1030-T, 1000, 900, 830-T, 800		Mariner # 313 Standard on None Optional on: 3300-T, 3033-TI, 3050, 3000, 1050, 1030-T, 1000, 900, 830-T, 800
ARCHITECTURAL SPECIFICATIONS GENERAL: Sliding doors shall be manufactured by Fleetwood Aluminum Products, Inc. 2485 Railroad St, Corona, CA. The Series shall be (Select from the following): Thermally-Broken products: Series 3300-T, 1030-T, or 830-T Thermally-Broken Frame, Monolithic Panels: Series 3033-TI Non-Thermally Broken: Series 1000, 900, or 800. Non-Thermally Broken Multi-Slide/Pocket Doors: Series 3050 or 1050. MATERIAL: Sliding door frame and vent sections shall be aluminum alloy and temper 6063-T5. Component parts and accessories shall be stainless steel, aluminum, or other corrosion resistant material. FINISH: All aluminum members of frame, door, and screen frame shall be Commercial Clear Anodized, Class I Dark Bronze Anodized, or White Paint. (A wide array of custom finishes/colors available). CONSTRUCTION: All joints of the frame and vent sections shall be neatly fitted and secured to fully utilize the strength of the members and provide permanent watertight joints. The sliding panel, when in a locked position, shall not be removable from the outside. Both sliding panels and fixed shall be removable for maintenance. HARDWARE: The sliding vent shall be equipped with ball bearing, bottom-rolling type adjustable sheaves. These shall be adjustable from each end without having to remove the panel. Latches shall be mortise type and tested to meet or exceed the AAMA forced entry standards. GLAZING: The sliding panel and fixed shall be constructed to allow either shop or field glazing with vinyl glazing channel. The glazing channel shall be provided with the unit for glass specified. WEATHERSTRIPPING: Weatherstripping shall be silicone treated, fungus, mildew and moth resistant woven pile and/or virgin extruded vinyl. SCREENS: Rolling Screens shall be extruded hollow aluminum, fitted with 18 x 14 fiberglass cloth (aluminum mesh optional). Screens shall be furnished with four tension mounted adjustable rollers, interior and exterior pulls and latching device, and shall be finished to match the master frame and panels of the sliding door. INSTALLATION: (Not by manufacturer). Sliding doors shall be installed in prepared openings according to manufacturer's instructions. All door frames shall be installed plumb, level, and square to allow proper functioning in regard to sliding, locking and weathering. It shall be the responsibility of the installer to be sure that the installation conforms in every way to all applicable building codes. PRODUCT OPTIONS • Stainless Steel Rollers • Stainless Steel Latches • Extruded and Rolled Formed Grids for a "True Divided Lite" Look. • Three Standard Colors: Clear Anodize, Class I Dark Bronze Anodize, White Paint • Custom Colors in Paint and Anodizing • Deluxe Door Screens • Heavy Duty Tandem Rollers • Stainless Steel Tracks • Sound Control Products • Low Emissivity Glass • High Performance Verticals • High Water Thresholds • Flush Interior Thresholds • Thermal Break for Energy Savings FLEETWOOD ALUMINUM PRODUCTS, INC. 2485 Railroad Street • Corona, California 91720 Telephone (909) 279-1070 • Fax (909) 279-8068

Sliding Glass Doors - Page 11