Thru-the-wall air conditioners offer ultra-quiet, energy efficient cooling and heating.

A PERFECT CHOICE FOR ANY APPLICATION

Measuring only 16 ¾" x 27", Friedrich WallMaster® thru-the-wall units are ideal for new construction, retrofits and residential remodeling. They offer ultra-quiet operation, dependable performance and the highest energy efficiency ratings. The contemporary styling and neutral color compliments any décor. WallMaster® thru-the-wall units are an exact fit for Fedders sleeves.

SUPERIOR CONSTRUCTION

Interior noise and vibrations are virtually eliminated by the extensive sound insulation. The smooth power of its rotary compressor reduces operating noise with increased efficiency. The larger blower wheel and condenser fan allow for greater movement of air at lower speeds.

THRU-THE-WALL FEATURES

• Residential/commercial application

• The most energy efficient line in the industry

• Exact fit for Fedders sleeves. Measures only 27" W x 16 " H

• Ultra-quiet operation

• Three-speed fan

• Mounts flush with exterior wall

• Magna-I copper coils

• Efficient rotary compressor

• Optional architectural grille for aesthetic enhancement of building exterior

• Easy-to-reach, top mount controls

• Over 2,000 service agencies in the U.S.

T H R U - T H E - W A L L A I R C O N D I T I O N E R S & H E A T/C 0 O L S Y S T E M S

INSTALLATION ACCESSORIES

DK • DRAIN KIT -- Instaaled at the back of the unit and allows for attachment to permanent condensate disposal system, if disposal is neccesary or desired Heat/cool models.

SB • SUB BASE -- Used as a base for the unit when it is desired to place the cord and receptable within the installation, or simply as a base for the unit when mounted low in the wall.

IDK • INTERNAL DRAIN KIT -- Designed for new construction application. Normal use would be with reverse cycle units that are to be drained within the wall structure, where a condensate drain system has been built into the wall interior. Primarily for heat/cool models, but may be used on cooling models.

BAK • BAFFLE ADAPTER KIT __ Necessary when installing in the Fedders "B" sleeve. See below.

Friedrich WallMaster® Thru-the-units are designed and built in the U.S.

Thru-the-wall chassis and sleeves are sold and shipped separately