| ITEM |
DESCRIPTION |
MODEL NO |
| WALL
PLENUM |
Two-part sleeve that telescopes in and out from 4½"-
8" in width. The wall plenum sits inside the exterior wall penetration. DIMENSIONS: 24 1/8" Width x 30 3/8" Height
CUTOUT DIMENSIONS: 24 5/8" Width x 30 7/8" Height
|
VPWP1 |
|
Same as VPWP1, but telescopes to a larger width, 8"-
14" as required. DIMENSIONS: 24 1/8" Width
x 30 3/8" Height
CUTOUT DIMENSIONS: 24 5/8" Width x 307/8" Height
|
VPWP2 |
| ARCHITECTURAL LOUVER |
Extruded aluminum grille that attaches to the outdoor
section of the wall plenum. DIMENSIONS: 25 9/16"
Width x 31 1/16" Height
|
VPAL1 |
| RETURN AIR GRILLE/
ACCESS PANEL (Option 1) |
Serves as an access panel to chassis and interior return air
grille. A field-supplied (12" x 20") filter is mounted inside the grille. DIMENSIONS: 30" Width x 50" Height
CUTOUT DIMENSIONS: 28 ¼" Width x 48 ¼'' Height
|
VPRG1 |
| RETURN AIR GRILLE
(Option 2) |
Interior return air grille that hinges to allow a
field-supplied (16" x 20" ) filter to slip inside. Must be used when an access
door/panel already exists in closet. DIMENSIONS: 22
3/8" Width x 18 7/16" Height
CUTOUT DIMENSIONS: 20 ½" Width x 16
½" Height
|
VPRG2 |
| FILTER BRACKETS
(Option 3) |
Brackets allow
field-supplied (16" x 20") filter to be attached directly to the unit's chassis. |
VPFB1 |
| THERMOSTAT |
Honeywell 24 Volt
wall mounted thermostat. (Single stage heat and cool.) 24 Volt transformer is factory installed into all chassis. |
VPRT1 |
