architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share
  Garland Floor Co.   Garland Floor Co.  

Garland Flooring Products - Page 19

   

Garland Floor Co.

Chemi-Top™ Resurfacers/Chemi-LDR Slurry Systems

Chemi-LDR™ 610 Light-Duty Slurry Resurfacer

gar19a.jpg (16088 bytes)

A high-gloss, slurry resurfacer for light-duty applications, Chemi-LDR 610 provides durability, impact resistance and high bond strength to concrete. It is designed for floors that are too rough for a thin-film or high-build coating or sealer, but which have not deteriorated to the point where a heavy-duty floor resurfacer is needed to repair them.

Chemi-Top™ 300 General-Purpose Resurfacer

Chemi-Top 300 is an economical resurfacer for use over concrete in general-purpose applications. It also offers good chemical resistance and excellent value. Typically applied at 3/16", this resurfacer is designed for hand trowel and power trowel applications.

Chemi-Top™ 700 Premium Resurfacer

Chemi-Top 700 is a high-strength resurfacer designed for applications requiring greater durability. It offers good abrasion, impact and chemical resistance, with a higher resin-to-aggregate ratio when compared to typical industrial resurfacers (4.5 to 1). Applied at 3/16", it also offers excellent value for a premium resurfacer.

Chemi-Top™ 710 Chemical-Resistant Resurfacer

Chemi-Top 710 is a high-strength resurfacer with high chemical resistance. Chemi-Top 710 provides increased resistance against solvents and acids, with a higher resin-to-aggregate ratio when compared to typical industrial resurfacers (4.5 to 1). Applied at 3/16".

Super Chemi-Top™ 900 High-Performance Resurfacer

Garland Super Chemi-Top 900 is designed to withstand the rigors of heavy-wheeled traffic in dock, manufacturing and other high-abuse areas. It provides unsurpassed protection of concrete, even in the harshest manufacturing environments. The addition of proprietary fillers to Garland's proven epoxy flooring chemistry delivers abrasion resistance up to 50% higher than traditional, industrial epoxy floor resurfacers. Applied at 3/16".

Typical Physical Properties
LDR 610 CT 300 CT 700 CT 710 CT 900
COMPRESSIVE STRENGTH 11,000 psi 10,000 15,000 15,000 14,000 psi
ASTM C 579-A (75.4 MPa)
FLEXURAL STRENGTH 10,000 psi 3,200 4,000 4,000 4,400
ASTM C 580 (68.6 MPa)
TENSILE STRENGTH 6,000 psi 2,000 2,000 2,000 2,000
ASTM C 307 (41.1 MPa)
IMPACT RESISTANCE 16 in.-lbs 12 in.-lbs 16 in.-lbs 16 in.-lbs 16 in.-lbs
ASTM D 2794 Gardner (18 cm-kg) (18 cm-kg) (18 cm-kg) (18 cm-kg) (18 cm-kg)
MIL-D-3134 Sec. 4.7.3 direct & reverse
EFFECTIVE SHRINKAGE passes passes passes passes passes
ASTM C 883
THERMAL COMPATIBILITY passes passes passes passes passes
ASTM C 884
ADHESION: CONCRETE 350 psi 350 psi 350 psi 350 psi 350 psi
ASTEM D 4541 Elcometer (2.4 MPa) (2.4 MPa) (2.4 MPa) (2.4 MPa) (2.4 MPa)
concrete concrete concrete concrete concrete
failure failure failure failure failure
ABRASION RESISTANCE CS-17 Wheels H-10 Wheels H-10 Wheels H-10 Wheels H-10 Wheels
ASTM D 4060 Taber Abraser 50-65 mgs/ 400 mgs/ 320 mgs/ 300 mgs/ 265 mgs/
1000 gm. load per wheel 1000 cycles 1000 cycles 1000 cycles 1000 cycles 1000 cycles
FLAMMABILITY self- self- self- self- self-
ASTM D 635 extinguishing extinguishing extinguishing extinguishing extinguishing
% SOLIDS 100 100 100 100 100
As Supplied



Request for Information / Request a Catalog from Garland Floor Co.
 
 
 
To request more information from Garland Floor Co., please complete the form below.
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.