architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share
  Garland Floor Co.   Garland Floor Co.  

Garland Flooring Products - Page 24

   

Garland Floor Co.

Chemi-Top™ Resurfacers/

Chemi-LDR Slurry Systems

DESCRIPTION

Garland Chemi- Top resurfacers are typically designed for application over old or worn concrete or as a protective overlayment on new concrete. They turn old floors into safer, more aesthetically appealing surfaces. In addition to concrete, these topping are formulated to be applied over wood and metal surfaces.

Common environments for Chemi-Top resurfacers include areas with heavy forklift and steel-wheel cart traffic; areas exposed to abrasion, impact and spills of acids, caustics, solvents, grease, oil and food; wet process areas requiring skid resistance; and clean rooms where dust cannot be tolerated.

The Chemi-Top resurfacer product line offers a solution for every environment. Garland offers systems with higher fill ratios for thermal resistance, lower fill ratios for high-wear and chemical resistance, and metallic-filled for excessive wear and impact resistance. One resurfacer cannot meet all of these demands.

Call Garland - we offer solutions.

CHEMI-TOP™ 700 PREMIUM RESURFACER

Chemi-Top 700 is a high-strength resurfacer designed for applications requiring greater durability. It offers good abrasion, impact and chemical resistance, with a higher resin-to-aggregate ratio when compared to typical industrial resurfacers (4.5 to 1). Applied at 3/16", it also offers excellent value for a premium resurfacer.

CHEMI-TOP™ 710 CHEMICAL-RESISTANT RESURFACER

Chemi-Top 710 is a high-strength resurfacer with high chemical resistance. Chemi-Top 710 provides increased resistance against solvents and acids, with a higher resin-to-aggregate ratio when compared to typical industrial resurfacers (4.5 to 1). Applied at 3/16".

SUPER CHEMI-TOP™ 900 HIGH-PERFORMANCE RESURFACER

Garland Super Chemi-Top 900 is designed to withstand the rigors of heavy-wheeled traffic in dock, manufacturing and other high-abuse areas. It provides unsurpassed protection of concrete, even in the harshest manufacturing environments. The addition of proprietary fillers to Garland's proven epoxy flooring chemistry delivers abrasion resistance up to 50% higher than traditional, industrial epoxy floor resurfacers. Applied at 3/16".

Chemi-Top™ Resurfacers/Chemi-LDR Slurry Systems

CHEMI-LDR™ 610 LIGHT-DUTY SLURRY RESURFACER

A high-gloss, slurry resurfacer for light-duty applications, Chemi-LDR 610 provides durability, impact resistance and high bond strength to concrete. It is designed for floors that are too rough for a thin-film or high-build coating or sealer, but which have not deteriorated to the point where a heavy-duty floor resurfacer is needed to repair them.

gar24a.jpg (23200 bytes)

CHEMI-TOP™ 300 GENERAL-PURPOSE RESURFACER

Chemi-Top 300 is an economical resurfacer for use over concrete in general-purpose applications. It also offers good chemical resistance and excellent value. Typically applied at 3/16", this resurfacer is designed for hand trowel and power trowel applications.

TYPICAL PHYSICAL PROPERTIES
  LDR610 CT 300 CT 700 CT 710 CT 900
COMPRESSIVE STRENGTH 11,000 psi 10,000 psi 15,000 psi 15,000 psi 14,000 psi
ASTM C 579-A (75.4 MPa) (68.6 MPa) (102.8 MPa) (102.8 MPa) (95.9 MPa)
FLEXURAL STRENGTH 10,000 psi 3,200 psi 4,000 psi 4,000 psi 4,400 psi
ASTM C 580 (68.6 MPa) (21.9 MPa) (27.4 MPa) (27.4 MPa) (30.1 MPa)
TENSILE STRENGTH 6,000 psi 2,000 psi 2,000 psi 2,000 psi 2,000 psi
ASTM C 307 (41.1 MPa) (13.7 MPa) (13.7 MPa) (13.7 MPa) (13.7 MPa)
IMPACT RESISTANCE 16 in.-lbs 12 in. -lbs 16 in. -lbs 16 in. -lbs 16 in. -lbs
ASTM D 2794 Gardner (18 cm-kg) (14 cm-kg) (18 cm-kg) (18 cm-kg) (18 cm-kg)
MIL-D-3134 Sec. 4.7.3 dir. & rev. dir. & rev. dir. & rev. dir. & rev. dir. & rev.
EFFECTIVE SHRINKAGE passes passes passes passes passes
ASTM C 883
THERMAL COMPATIBILITY passes passes passes passes passes
ASTM C 884
ADHESION: CONCRETE 350 psi 350 psi 350 psi 350 psi 350 psi
ASTM D 4541 Elcometer (2.4 MPa) (2.4 MPa) (2.4 MPa) (2.4 MPa) (2.4 MPa)
concrete concrete concrete concrete concrete
failure failure failure failure failure
ABRASION RESISTANCE CS-17 Wheels H-10 Wheels H-10 Wheels H-10 Wheels H-10 Wheels
ASTM D 4060 Taber Abraser 50-65 mgs/ 400 mgs/ 320 mgs/ 300 mgs/ 265 mgs/
100 gm. load per wheel 1000 cycles 1000 cycles 1000 cycles 1000 cycles 1000 cycles
FLAMMABILITY self- self- self- self- self-
ASTM D 635 extinguishing extinguishing extinguishing extinguishing extinguishing
% SOLIDS 100 100 100 100 100
As Supplied

For more information or a floor consultation, call Garland Floor Company toll free :

1-800-321-2395



Request for Information / Request a Catalog from Garland Floor Co.
 
 
 
To request more information from Garland Floor Co., please complete the form below.
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.