Chemi-Top 900™

DESCRIPTION

Chemi-Top 900 is Garland's unique, high-abrasion-resistant/wear-resistant resurfacer. Also known as Super Chemi-Top, the flooring substrate minimizes the potential of static electricity build-up. This type of charge may cause a shock to personnel as they walk across the floor and touch metal. The same charge can be extremely dangerous in a potentially explosive area (e.g., grain mills, flammable areas, particulate-saturated air).

Chemi-Top 900 was tested at 75°F, 35% relative humidity (RH); it typically did not allow a charge greater than 600 volts to be generated.

The system is a monolithic epoxy floor topping primarily designed for power troweling. Chemi-Top 900's unique formulation, combined with the recommended installation techniques, give the product its superior physical properties.

The aggregate-to-liquid ratio does not exceed 4.5-to-1, compared to a 6-or 7-to-1 ratio for similar products. The minimum application thickness is 3/16".

PACKAGING

Chemi-Top 900 is a conveniently packaged, seven-component, 100% reactive, epoxy resin system. It is supplied in a kit.

TYPICAL PHYSICAL PROPERTIES

• Compressive Strength: 14,000 psi (ASTM C-579A)
• Tensile Strength: 2000 psi (ASTM C-307)
• Flexural Strength: 4400 psi (ASTM C-580)
• Modulus of Elasticity: 1.88 x 10E6 psi (ASTM C-580)
• Coefficient of Thermal Expansion: 1.2 x 10E-5 in/in/°F (ASTM C-531)
• Abrasion Resistance: CS-17 Wheels 40-60 mgs., 1000 cycles. (ASTM D 4060 Taber Abraser 1000 gm. load per wheel)
• Impact Resistance: 16 in.-lbs. (18 cm.-kg.) direct and reverse. (MIL-D 3134, Section 4.7.3)
• Effective Shrinkage: Passes test (ASTM C-883)
• Thermal Compatibility: Passes test (ASTM C-635)
• Adhesion to Concrete: >400 psi (2.4 MPa); Concrete failure (ACI Committee 403, Bulletin 59-43)
• Water Absorption: <0.1% (ASTM C-413)

For more information or a floor consultation,

call Garland Floor Company toll free:

1-800-321-2395