Dimensions in Light (Weck Glass Block/Glashaus, Inc.)

Metal Networks for Authentic WECK® Glass Block Walls and Windows… Save Time, Money and Labor. Now there’s a faster, easier way to enhance any project, large or small, with authentic glass block. Install genuine WECK glass blocks with any of three extruded metal BlokUp systems.
Full-frame extruded aluminum system adds strength, saves labor. Now, WECK block windows can be preassembled off-site, like conventional windows. (Installed quickly with optional nailing fins.) Or you can construct a framed wall of blocks, on site, up to 150 sq. ft. – and still save much time and labor.
Framed curved-wall system for design versatility, increased strength, added security. BlokUp’s exclusive connectable radius sections permit any professional tradesman to create graceful curved walls of glass, indoors or out. Frame and horizontal metal sections provide added strength for additional home security. Hinged metal sections can be easily bent to fit any wall radius.
Anchor Clip system provides clean-line walls of glass block, without aesthetic or structural compromise. Special telescopic anchor clip permits unobstructed installations without sacrificing strength or stability. System adapts to any-size opening. As with framed systems, BlokUp’s Clip System adds the strength of horizontal metal beams.

BlokUp Advantages • Design versatility: systems for curved, stepped or straight walls • Ease of block assembly • Predictable finished quality • Faster installation • Lower installed cost • Mechanical connections • Metal beams in all horizontal joints • 3 ways weathertight: silicone inside, silicone front and rear seals • Optional thermal break prevents energy-robbing conduction • Optional sill drain system for automatic drainage	1 Glass block sealant is applied to the center seam of the vertical edge of the block. The vertical separator is inserted into the slot of the frame and against the glass block	3 Sealant is applied to the center of the horizontal separator and on the sides of the frame. Next, the first block of the second course is laid. Sealant is then applied to the vertical side of the block, and the next vertical separator put in place.
	2 Sealant is next applied to the center seam of the first course. Next, the horizontal separator is laid on the blocks, extending from slot to slot at the sides. More than a spacer, the metal separator functions as a stiffener in every horizontal point.	4 Smaller installations can be quickly erected by connecting horizontal separators with BlokUp clips.

WECK is a registered mark of J. Weck GmbH u. Co., BlokUp is a trademark of Rawmaw investment Pty Ltd. Trade Mate is a registered mark of Dow Corning Corp.

BlokUp Mortarless Systems