architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share
  GS Metals   GLOBETRAY  

GLOBETRAY -Ladder - Straight - 4 - Light Duty - Steel

   

GLOBETRAY

GLOBETRAY®  CABLE TRAY SYSTEMS

LADDER
STRAIGHT SECTIONS

STEEL/LIGHT DUTY
4-IN. NOMINAL DEPTH

Norm. Depth: 4"
Inside Widths: 6", 9", 12", 18", 24"
Rung Spacings: 6", 9", 12"
Length: 12 ft.
Rungs: Standard (as shown below)
           Standard Inverted
Standard finish is pre-galvanized per ASTM A525.
Options: Hot-dip galvanizing after fabrication per ASTM A386.
              PVC or other special coating upon written request.

gbt005a.gif (22606 bytes)

gbt006a.gif (15164 bytes)

gbt006b.gif (10907 bytes)


CATALOG
NO>		 VOLUME
CAPACITY*
LBS./FT.		 CLEAR SPAN
6 FT. 8 FT. 10 FT. 12 FT.
LOAD—
LBS,/FT.		 DEFL.
-IN.		 LOAD—
LBS,/FT.		 DEFL.
-IN.		 LOAD—
LBS,/FT.		 DEFL.
-IN.		 LOAD—
LBS,/FT.		 DEFL.
-IN.
PLLS-SS06-0600-4
PLLS-SS09-0600-4
PLLS-SS12-0600-4		 86 277
277
277		 .277
.277
.277		 156
156
156		 .312
.312
.312		 100
100
100		 .600
.600
.600		 69
69
69		 .828
.828
.828
PLLS-SS06-0900-4
PLLS-SS09-0900-4
PLLS-SS12-0900-4		 129 277
277
277		 .277
.277
.277		 156
156
156		 .312
.312
.312		 100
100
100		 .600
.600
.600		 69
69
69		 .828
.828
.828
PLLS-SS06-1200-4
PLLS-SS09-1200-4
PLLS-SS12-1200-4		 172 277
277
277		 .277
.277
.277		 156
156
156		 .312
.312
.312		 100
100
100		 .600
.600
.600		 69
69
69		 .828
.828
.828
PLLS-SS06-1800-4
PLLS-SS09-1800-4
PLLS-SS12-1800-4		 N/A 277
277
277		 .277
.277
.277		 156
156
156		 .312
.312
.312		 100
100
100		 .600
.600
.600		 69
69
69		 .828
.828
.828
PLLS-SS06-2400-4
PLLS-SS09-2400-4
PLLS-SS12-2400-4		 N/A 277
277
277		 .277
.277
.277		 156
156
156		 .312
.312
.312		 100
100
100		 .600
.600
.600		 69
69
69		 .828
.828
.828
Deflection for
One Lb./Lin. Ft.		   1 .0010 1 .0020 1 .0060 1 .0120

Side Rail Governs
*Volume capacity is the weight of a quantity of copper (@500 lbs./c. ft.) that could occupy the full inside usable tray space. Allowable loads and deflections shown are applicable to cable tray supported as a simple span and without splice connectors located in the span.
†HDGAF denotes hot-dip galvanized after fabrication.



Request for Information / Request a Catalog from GS Metals
 
 
 
To request more information from GS Metals, please complete the form below.
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.