architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share
  GS Metals   GLOBETRAY  

GLOBETRAY - Ladder Fittings Side Rails

   

GLOBETRAY

GLOBETRAY®  CABLE TRAY SYSTEMS

LADDER FITTING SIDE RAILS ( page 2)
STEEL OR ALUMINUM
3, 4 & 6-IN. Nominal Depths

 

gbt019a.gif (6474 bytes)

 

HORIZONTAL ELBOW

Nom Depths: 3", 4", 6" (3" depth available in LIght Duty Steel tray only).
Widths: 6", 9", 12", 18", 24', 30", 36" (30" & 36" widths not available in Light Duty Steel tray).
Radii: 12", 24" for Light Duty Steel, 3" & 4" deep.
         12", 24" for medium 4" deep.
         24" for Medium 6" deep.
         24", 36" for Heavy Duty Tray.
Bend Angles: 30°, 45°, 60°, 90°

gbt019b.gif (12444 bytes)

 

gbt019c.gif (4163 bytes)

 

BEND
ANGLE
A		 RADIUS
R
-IN.		 WIDTHS (1) (W)
6" 9" 12" 18" 24" 30" 36"
L S L S L S L S L S L S L S
30° 12 26.2 7.0 27.7 7.4 29.2 7.8 32.2 8.6 35.2 9.4 38.2 10.2 41.2 11.0
24 38.2 10.2 39.7 10.6 41.2 11.0 44.2 11.8 47.2 12.6 50.2 13.4 53.2 14.2
36 50.2 13.4 51.7 13.8 53.2 14.2 56.2 15.1 59.2 15.9 62.2 16.7 65.2 17.5
45° 12 31.5 13.0 33.6 13.9 35.7 14.8 39.9 16.5 44.2 18.3 48.4 20.0 52.7 21.8
24 48.4 20.1 50.5 20.9 52.7 21.8 56.9 23.6 61.2 25.3 65.4 27.1 69.6 28.8
36 65.4 27.1 67.5 28.0 69.6 28.8 73.9 30.6 78.1 32.4 82.4 34.1 86.6 35.9
60° 12 35.0 20.2 37.6 21.7 40.2 23.2 45.4 26.2 50.6 29.2 55.8 32.2 61.0 35.2
24 55.8 32.2 58.4 33.7 61.0 35.2 66.2 38.2 71.3 41.2 76.5 44.2 81.7 47.2
36 76.5 44.2 79.1 45.7 81.7 47.2 86.9 50.2 92.1 53.2 97.3 56.2 102.5 59.2
90° 12 36.0 42.0 39.0 39.0 42.0 54.0 48.0 48.0 54.0 54.0 60.0 90.0 66.0 102.0
24 60.0 66.0 63.0 63.0 66.0 78.0 72.0 72.0 78.0 78.0 84.0 114.0 90.0 126.0
36 84.0 90.0 87.0 87.0 90.0 102.0 96.0 96.0 102.0 102.0 108.0 138.0 114.0 150.0

(1) Add flange widths to establish clearance dimensions for Medium and Heavy Duty trays.
See "ladder Fitting Side rails", for flange widths.

LADDER FITTINGS FOR LIGHT DUTY STEEL AND MEDIUM DUTY ALUMINUM TRAYS HAVE IN-TURNED FLANGES.
*HDGAF denotes hop-dip galvanized after fabrication.



Request for Information / Request a Catalog from GS Metals
 
 
 
To request more information from GS Metals, please complete the form below.
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.