GLOBETRAY - Trough Straight Sections - Steel

TROUGH STRAIGHT SECTIONS

STEEL
3, 4 & 6-IN. Nominal Depths

AVAILABLE PRODUCTS

Inside Depth: 3-1/2". 4-1/2", 6-1/2"
Inside Width: 4", 6", 12", 18", 24", 30"
Length: 12 ft. (up to 24 ft. lengths available on inquiry)
Standard Finish: pre-galvanized per ASTM A525
Options: Hot-dip galvanized after fabrication per ASTM A153. PVC or other special coating upon request.
* Not available in Combination.
Nominal Thickness: 16 guage
Cross-Sectional Area: -for 3" deep = 0.57 in.²
                                 -for 4" deep = 0.70 in.²
                                 -for 6" deep = 0.95 in.²

Side rail Governs
Bottom Governs

Allowable loads and deflections are applicable to cable tray supported as a simple span and without splice connectors located in the span. Deflection is measured on the side rail at midspan.