GLOBETRAY (GS Metals)

GLOBETRAY^® CABLE TRAY SYSTEMS

TROUGH STRAIGHT SECTIONS

ALUMINUM
3, 4 & 6-IN. Nominal Depths

AVAILABLE PRODUCTS

Inside Depth: 3-1/2". 4-1/2", 6-1/2"
Inside Width: 4", 6", 12", 18", 24", 30"
Length: 12 ft. (up to 24 ft. lengths available on inquiry)
Standard Finish: pre-galvanized per ASTM A525
Options: Hot-dip galvanized after fabrication per ASTM A153. PVC or other special coating upon request.
* Not available in Combination.
Nominal Thickness: 16 guage
Cross-Sectional Area: -for 3" deep = 0.74 in.²
-for 4" deep = 0.90 in.²
-for 6" deep = 1.22 in.²

gbt026a.gif (21905 bytes)

gbt026b.gif (17168 bytes)

CATALOG NO.	6 FT.		8 FT.		10 FT.		12 FT.
CATALOG NO.	LOAD LBS / FT	DEFL -IN.	LOAD LBS / FT	DEFL -IN.	LOAD LBS / FT	DEFL -IN.	LOAD LBS / FT	DEFL -IN.
AT00-SS01-0400-3 AT00-SS01-0600-3 AT00-SS01-0900-3 AT00-SS01-1200-3 AT00-SS01-1800-3 AT00-SS01-2400-3 AT00-SS01-3000-3	188 188 188 188 188 188 188	.54 .54 .54 .54 .54 .54 .54	105 105 105 105 105 105 105	.95 .95 .95 .95 .95 .95 .95	67 67 67 67 67 67 67	1.49 1.49 1.49 1.49 1.49 1.49 1.49	46 46 46 46 46 46 46	2.12 2.12 2.12 2.12 2.12 2.12 2.12
Deflection for One Lb. / Lin. Ft.	1	.0029	1	.0090	1	.0222	1	.0459
AT00-SS01-0400-4 AT00-SS01-0600-4 AT00-SS01-0900-4 AT00-SS01-1200-4 AT00-SS01-1800-4 AT00-SS01-2400-4 AT00-SS01-3000-4	232 232 232 232 232 232 181	.35 .35 .35 .35 .35 .35 .28	129 129 129 129 129 129 129	.63 .63 .63 .63 .63 .63 .63	84 84 84 84 84 84 84	.99 .99 .99 .99 .99 .99 .99	57 57 57 57 57 57 57	1.41 1.41 1.41 1.41 1.41 1.41 1.41
Deflection for One Lb. / Lin. Ft.	1	.0015	1	.0049	1	.0118	1	.0247
AT00-SS01-0400-6 AT00-SS01-0600-6 AT00-SS01-0900-6 AT00-SS01-1200-6 AT00-SS01-1800-6 AT00-SS01-2400-6 AT00-SS01-3000-6	291 291 291 291 291 269 187	.17 .17 .17 .17 .17 .16 .11	164 164 164 164 164 164 164	.31 .31 .31 .31 .31 .31 .31	105 105 105 105 105 105 105	.49 .49 .49 .49 .49 .49 .49	73 73 73 73 73 73 73	.70 .70 .70 .70 .70 .70 .70
Deflection for One Lb. / Lin. Ft.	1	.0006	1	.0019	1	.0047	1	.0096

Side rail Governs
Bottom Governs

Allowable loads and deflections are applicable to cable tray supported as a simple span and without splice connectors located in the span. Deflection is measured on the side rail at midspan.

GLOBETRAY - Trough Straight Sections - Aluminum