|
|
GS Metals
FLEXTRAY
FLEXTRAY - Straight Sections - Page 2
FLEXTRAY
FLEX |
TRAY® |
|
STRAIGHTSECTIONS |
||
1-1/2" DEPTH — Clear Span
| Width | Catalog No. | Load | 5 ft. | 6 ft. | 7 ft. | 8 ft. | 9 ft. | 10 ft. |
| 2" | FT1.5x2x10 |
L (lb/ft) | 3 | 3 | 3 | 3 | 3 | 3 |
| 4" | FT1.5x4x10 |
L (lb/ft) | 5 | 5 | 5 | 5 | 5 | 5 |
| 6" | FT1.5x6x10 |
L (lb/ft) | 8 | 8 | 7 | 6 | 6 | 5 |
| 8" | FT1.5x8x10 |
L (lb/ft) | 10 | 8 | 7 | 6 | 5 | 5 |
| 12" | FT1.5x12x10 |
L (lb/ft) | 10 | 8 | 6 | 6 | 5 | 5 |
Standard Finish: Elctrogalvanized
Optional Finishes: Black matte, Hot dip galvanized, 316L stainless, Epoxy (gray, white and
other colors available).
2" DEPTH — Clear Span
| Width | Catalog No. | Load | 5 ft. | 6 ft. | 7 ft. | 8 ft. | 9 ft. | 10 ft. |
| 2" | FT2x2x10 |
L (lb/ft) | 5 | 5 | 5 | 5 | 5 | 5 |
| 4" | FT2x4x10 |
L (lb/ft) | 9 | 9 | 9 | 9 | 9 | 9 |
| 6" | FT2x6x10 |
L (lb/ft) | 14 | 14 | 14 | 14 | 11 | 9 |
| 8" | FT2x8x10 |
L (lb/ft) | 19 | 19 | 17 | 14 | 12 | 9 |
| 12" | FT2x12x10 |
L (lb/ft) | 28 | 28 | 25 | 20 | 16 | 11 |
| 16" | FT2x16x10 |
L (lb/ft) | 37 | 33 | 27 | 24 | 20 | 16 |
| 18" | FT2x18x10 |
L (lb/ft) | 41 | 36 | 31 | 26 | 20 | 15 |
| 20" | FT2x20x10 |
L (lb/ft) | 45 | 39 | 32 | 26 | 20 | 14 |
| 24" | FT2x24x10 |
L (lb/ft) | 54 | 46 | 38 | 32 | 26 | 20 |
Optional Finishes: Black matte, Hot dip galvanized, 316L stainless, Epoxy (gray, white and other colors available).
All testing done at a deflection of L/240
L = span length
Experimental loadings were used except where the 100% maximum fill of telecommunication cable was achieved.
Testing on FLEXTRAY was done according to the following procedure:
A four support, continuous span testing apparatus was set up where FLEXTRAY was spliced together providing equal overhang on each end over the specified spans. A splice was placed at L/5 in the central span as determined to be the zero sag moment.
| IT'SSIMPLECABLEMANAGEMENT™ |  |