FLEX |
TRAY® |
|
|
TECHNICALINFORMATION |
Product Description
FLEXTRAY is a welded wire mesh cable management system
produced from high mechanical strength steel wires.
FLEXTRAY is produced by first welding a net, forming the channels and then finishing after
fabrication. The 2" x 4" mesh permits continuous ventilation of the cables
installed in the tray which prevents heat build-up. This unique open design also prevents
the build-up of dust, contaminants and bacterial proliferation.
FLEXTRAY is produced in standard 10' (3 meter) lengths and
is supplied in three channel depths, 1-1/2" (30mm) 2" (54mm) and 4"
(105mm). FLEXTRAY is offered in nine different widths: 2", 4", 6", 8",
12", 16", 18",20" and 24" nominal. FLEXTRAY is offered in five
finishes: Electroplated Zinc Galvanized, Hot Dip Galvanized, ASA 61 Grey Polyester powder
coat finish, AISI 316L Stainless Steel and Black Matte.
Special sizes are available to meet your unique
requirements.
Finishes
Electroplated Zinc Galvanizing (Standard Stock Finish):
Electrodeposited zinc coating applied to an average thickness of 0.7 mils (18 microns) to
0.8 mils (20 microns). This surface treatment is suitable for most indoor applications and
may be used outdoors in mild environments only.
Hot Dip Galvanizing:
Provided by immersing the product in a molten zinc bath, this coating is applied to an
average thickness of 2.4 mils (60 microns) to 3.2 mils (80 microns). This treatment is
most suitable for outdoor applications or situations where increased corrosion resistance
is desired.
Epoxy Powder Coat Paint:
Powder painted surface treatment using ASA 61. This finish option provides an
aesthetically pleasing durable coating ideal for use in office buildings and various other
indoor applications. Powder Coat Colors are available on special request.
Stainless Steel:
Corrosive resistant AISI 316L Stainless Steel with no additional surface treatment. This
material option provides the most corrosion resistant option available. Stainless steel is
used primarily in marine environments or food processing facilities.
Black Matte:
Cationic Epoxy Electro Coat .4 – 1.2 mils. film thickness.
FLEXTRAY FILL RATES
CATALOG
# |
HEIGHT
(Actual) (in.) |
WIDTH
(Actual) (in.) |
FILL
AREA
OF TRAY
(sq. in.) |
NUMBER
OF
LOOSE CABLES
@ 50% FILL |
NUMBER
OF
BUNDLED CABLES
@ 50% FILL |
FT1.5x2x10
FT1.5x4x10
FT1.5x6x10
FT1.5x8x10
FT1.5x12x10 |
1
1
1
1
1 |
2
3.9
5.9
7.9
11.8 |
2.0
3.9
5.9
7.9
11.8 |
25
50
74
99
148 |
1
3
4
5
8 |
FT2x2x10
FT2x4x10
FT2x6x10
FT2x8x10
FT2x12x10
FT2x16x10
FT2x18x10
FT2x20x120
FT2x24x120 |
2.1
2.1
2.1
2.1
2.1
2.1
2.1
2.1
2.1 |
2
3.9
5.9
7.9
11.8
15.9
17.9
19.9
23.9 |
4.2
8.2
12.4
16.6
24.8
33.4
37.6
41.8
50.2 |
33
66
99
132
197
263
298
329
374 |
2
3
5
7
10
13
15
17
19 |
FT4x6x10
FT4x8x10
FT4x12x10
FT4x16x10
FT4x18x10
FT4x20x10 |
4
4
4
4
4
4 |
5.9
7.9
11.8
15.9
17.9
19.9 |
23.6
31.6
47.2
63.6
71.6
79.6 |
197
263
394
526
587
657 |
10
13
20
27
30
33 |
Cables used for fill rate testing were 4 pair 24AWG.
Bundles consisted of 25 cables, each having a .25" diameter.
| IT'SSIMPLECABLEMANAGEMENT™ |
 |
