|
In addition to safety, the resilient surface of GRIP STRUT Safety Grating cushions
the impact of footfalls thereby lessening worker fatigue and increasing his efficiency.
GRIP STRUT Safety Grating is your best safety buy. These cost-cutting and production
improving advantages spell out why:
Safer, serrated surface
Grips soles securely-in all directions -in practically
every place. These non-slip GRIP STRUT Grating surfaces are ideal for inside or outside
locations where mud, ice, snow, oil and detergents can create hazardous walking
conditions. Openings are small enough to catch most falling tools and other dangerous
objects.
Maintenance-free open design
Permits quick drainage of fluids, chips, grease and mud.
Any ice accumulation shears easily under normal foot pressure. Open design allows
convenient access for cleaning. It is easily cleaned with brush, liquid or air spray to
minimize overall maintenance.
High load capacity, long life
High strength-to-weight performance is achieved through
depth of section and structural design. Bridged struts with integral side channels form a
plank that can support loads with minimum transverse and longitudinal *deflection. There
are no rivets or pressure joints to break or loosen. This sturdy construction provides the
advantages of heavy load-carrying capacity with minimal deflection; rugged durability with
longer-lasting performance.
Fast installation
Light, easy-to-handle planks make installation simpler and
quicker. They can be handled by one man. Most sections are rapidly bolted, clamped or
welded into place, easily field-cut at virtually any angle, or fabricated to adapt to
field conditions. Several attachment devices permit fastening to most existing surfaces;
allow fast installation or disassembly.
Economical to install, use
In addition to low material cost and nominal erection cost,
GRIP STRUT Safety Grating also saves with its long-lasting, rust-resisting materials and
finishes. Standard mill-galvanized finish resists corrosion to provide lasting surfaces.
High-strength aluminum and Types 304 and 316L stainless steel are available to provide
maximum corrosion resistance. Black unpainted steel available for installations requiring
hot dipped galvanized finish after fabrication. These lightweight but brawny panels permit
substantial reduction in structural steel requirements. Open design is self-cleaning and
virtually maintenance free.
Versatile in application
A variety of Standard widths and channel heights combine
with numerous Non-Standard shapes and sizes to meet almost any requirement of strength,
size, durability, weight, finish, appearance and application. GRIP STRUT Safety Grating
combines safety and durability with ease of fabrication and versatility. One piece
construction-no welds or rivets to fail-minimizes need for plant fabrication. Special
shapes and forming can be accomplished to suit unusual requirements.
It's simple and economical to apply finish coatings because
all surfaces are accessible to brush or spray. GRIP STRUT Grating may be hot dipped
galvanized after fabrication, anodized, plated, plastic-coated or otherwise finished to
suit job requirements.
Serrated GRIP STRUT Grating
Offers excellent slip resistance wherever maximum safety
underfoot is essential. Material meets anti-slip values set forth in Federal Specification
RR-G-1602A.
Non-serrated GRIP STRUT Grating For all-purpose use
where a high degree of slip resistance is required plus a smoother texture and design.
Product subject to extended lead time.
Standard GRIP STRUT Grating Planks Available in
materials and sizes to meet most load/span requirements. May be used as is or banded, cut,
welded, or punched to suit requirements. |
