architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share
  GS Metals   GRIP STRUT  

GRIP STRUT - Special

   

GRIP STRUT

grs01a.gif (32254 bytes) Special
and fabricated
products
 

Reconditioning material
Here's the "safety first" way to re-do worn and unsafe floors and stairs. Resurface with non-slip Grip Strut Safety Grating Reconditioning Material (RM). Grip Strut Grating is the only product that gives 500 wall-to-wall teeth per sq. ft. Serrated, diamond-shaped openings make Grip Strut Grating 10 to 180% safer than conventional gratings—permit mud, oil, grease and industrial waste to fall through, when used over open floor materials such as bar grating. Even ice shears free under normal foot pressure. Down-turned edges allow grating to lie flat and secure over existing flooring. Consult distributor for product specifications.

Other important Grip Strut Grating advantages include: easy field fabrication and fast, low-cost installation. RM products available on special order in standard materials and sizes.

 

Flat stock material.
The open matrix is symmetrical about the flat plane. Table (at right) indicates the approximate dimensions of flat metal available on each side. Flat Stock can also be manufactured to specific dimensions of flat metal on either or both sides. Consult your distributor for specifications and availability.

 

 

dimensions—steel and aluminum

matrix

flat metal each side

2-diamond
3-diamond
4-diamond
5-diamond
8-diamond
10-diamond

2-1/4" to 7-1/2"
2-3/8" to 6-1/2"
2-3/8" to 7-5/8"
2-3/8" to 6-1/2"
2-3/8" to 5-5/8"
3-1/4" to 7-5/8"



grs11a.gif (43062 bytes)
Flat stock is available in all standard materials and sizes.

 

grs11b.gif (71666 bytes)
Bar grating reconditioned to maximize safety underfoot.

 

grs11c.gif (46807 bytes)
Stairs reconditioned for added years of safety.



Request for Information / Request a Catalog from GS Metals
 
 
 
To request more information from GS Metals, please complete the form below.
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.