G -2512

G-2515 Steel Channels

Application of data:Loads shown apply to G-2515 regular steel channel installed with the continuous slot on the underside. The loads may also be applied to G-2512 regular steel channel installed with the slot on the topside provided that the channel lips are restrained from lateral movement at the channel ends, and at intervals of 3' 6" maximum. The lip restraint can be accomplished by attaching any fitting to the channel with the aid of a Globe Strut Lock Nut Uniform Loads: See table below. Concentrated Loads: Allowable concentrated loads can be obtained by dividing the uniform load by two. Deflection for the concentrated load can be found by multiplying the deflection of the uniform load by .08.

MATERIAL OPTIONS

1. Plain steel, conforming to ASTM A569-72 (standard)
2. Plain steel, conforming to ASTM A570-79, Gr. 33 (available on request).
3. Hot-dip mill-galvanized steel, conforming to ASTM A526-80 (standard).
4. Hot-dip mill-galvanized steel, conforming to ASTM A446-80 Gr. A (available on request).

FINISH OPTIONS

1. Hot-dip mill-galvanized, conforming to ASTM A525-80, coating class G90.
2. Green Paint
3. Gold chromate.

LENGTH OPTIONS

1. 10'-01/4", 20'-01/2"
   (± 1/8", standard tolerance)

MATERIAL & FINISH

1. Alloy 6063-T6, conforming to ASTM B221-74, extruded with min. 070" wall thickness, mill finish.

LENGTH OPTIONS

1. 10'-01/4", 20'-01/2"
   (± 1/8", standard tolerance)