|
G-1012
& G-1315
Channel Combinations |
|
Application of data:Loads shown apply to steel
channel combination with the load applied to one of the continuous-slotted sides.
Unlike single channel, lip restraint is not needed in either slot.
Uniform Loads: See table below.
Concentrated Loads: Allowable concentrated
loads can be obtained by dividing the uniform load by two. Deflection for the concentrated
load can be found by multiplying the deflection of the uniform load by .08.
MATERIAL OPTIONS
- Plain steel, conforming to ASTM A366-72 (standard).
- Plain steel, conforming to ASTM A570-79. Gr. 33 (available
on request)
- Hot-dip mill-galvanized steel, donforming to ASTM A526-80
(standard).
- Hot-dip mill-galvanized steel, conforming to ASTM A446-80
Gr. A (available on request).
FINISH OPTIONS
- Hot-dip mill-galvanized, conforming to ASTM A525-80, coating
class G90.
- Green Paint
LENGTH OPTIONS
- 10'-01/4", 20'-01/2"
(± 1/8", standard tolerance)
|
