Cooling/Heating Systems (Hastings Industries Inc.)

EC SERIES EVAPORATIVE COOLER

SPECIFICATIONS
Model		EC-40	EC-80	EC-120	EC-160	EC-220	EC-300	EC-400	EC-500	EC-600	EC-750
Evaporating Area - Sq.Ft.		6	1.2	1.8	24	32	45	60	70	84	108
Pump Motor	Number	1	1	1	1	1	1	2	2	2	2
	HP	1/50	1/6	1/6	1/6	1/C	1/6	(2) 1/6	(2) 1/6	(2) 1/6	(2) 1/6
	Amps	1.1	5.0	5.0	5.0	5.0	5.0	5.0 (ea.)	5.0 (ea.)	5.0 (ea.)	5.0 (ea-)
	Voltage	115 Volts - 1 Phase - 60 Hertz
Construction	Reservoir	Stainless Steel
Construction	Cabinet	Aluminized steel - exterior painted
Evaporative Media		12" Celdek
Water System		Schedule 40 PVC Pipe
Shipping Weight - lbs.		110	176	225	271	310	373	634	726	845	1067
Operating Weight - lbs.		335	560	650	825	880	1135	1680	1930	2085	2635

Standard Equipment
Engineers Specifications

Furnish and install the following Hastings evaporative cooling section:

Model Number

CFM

115/60/1 Pump Voltage

The evaporative cooler shall have 12" CELdek evaporative media, submersible water pump, schedule 40 P.V.C. water distribution system with splash tube spray over media, cast brass float type fill valve and manual bleed-off valve for constant sediment drainage. Cabinet to be constructed of 18 gauge aluminized steel with painted exterior. Reservoir to be 20 gauge stainless steel.

Options and Accessories

Automatic drain valve kit.
Automatic drain valve plus freeze protection kit.
Insulated transitions to Hastings blower sections
12" GLASdek media UL approved, UL900, Class 2 rating.
Flatbank or V-bank pre-filter section.
2" throwaway, cleanable or extended surface filters.
Intake louver with birdscreen.
Step down transformer for either 208/230 V. 1 Ph. or 230/
460 V. 3 Ph.
Matching base rail for use with Hastings blower section