STANDARD RAIL LOCK   5/8" dia. straight drop deadbolt. 3/4" throw Also: rail lock with 1-1/4" throw for special floor / clearance conditions Accepts standard cylinders (1-1/8" long) with cam as shown Equivalent cam numbers Yale   1161 Best     C4 Russwin   #1 U-Change    B Standard tracks available in mill finish aluminum; other finishes available when specified. 1/8", 3/16" or 1/4" track thickness compensates most door clearances to maintain constant sightline.

STANDARD RAIL LOCK

The Right Rail Series For Your Design

100 Series - 200 Series - Desinger Series HGP Rails Give You The Strength, Durability, Security and Lasting Beauty.

HGP 100 Series

Utilized for custom design systems requiring non-standard height, profile or configuration rails. Available for 3/8", 1/2", 3/4" and laminated glass doors. This system bonds the metal rail system to the glass by an expansion cement. This system is available in 3-3/8" standard height as well as any custom height desired.

HGP 200 Series

And now you can choose the durability, flexibility and beauty of 100 Series entrance rails...in a system offering unheard-of convenience and turnaround times.

HGP's new patent pending "dry glazed" rails replace the cement bonding of 100 Series rails with mechanical gasket and torque screw fasteners. You get a look similar to 100 Series rails, and you can still use most standard entrance sytstem hardware.

The difference? You get your doors when you need them, even when your jobs undergo last minute desgin or on-site construction changes. You get the durability of 100 Series rails as well, because the torque screws on HGP 200 Series rails are tightened from the bottom; the rails can't be unbolted once the door is installed.

The 200 Series rails are available as follows:

• 3-3/8" square rail
• 3-3/8" tapered rail
• 3-3/8" radiused rail
• 4" square
• 6" square