LIMITED WARRANTY

Each product fabricated by HGP & Affiliates, Inc. contains a limited warranty which will be summarized below. HGP extends limited warranties subject to the following conditions and restrictions and for the period of time set forth below. HGP DOES NOT WARRANT GLASS BREAKAGE UNDER ANY CIRCUMSTANCES.

HGP ENTRANCE SYSTEMS

HGP warrants that its tempered glass meets the quality and strength requirements of ASTM C- 1036 and C- 1048 Specifications and the Safety Criteria of CPSC 16 CFR 1201 Categories 1 & 2 and and ANSI Z97.1. HGP also warrants that under normal conditions of use, the rail components will not separate from the glass for a period of one (1) year after manufacture due to defective material or workmanship. HGP MAKES NO REPRESENTATION OR WARRANTY OF ANY KIND WITH RESPECT TO HARDWARE INCLUDING, BUT NOT LIMITED TO, LOCKS OR CLOSERS ORDERED BY THE CUSTOMER.

DESIGN CRITERIA

To achieve optimum functional performance and safety, several factors must be addressed:

1. Size of doors, sidelites or entrance area.

2. Weight of doors and hardware.

3. Deflection of glass and framing.

4. Loads on glass, hardware and framing.

5. Glazing methods.

6. Compatibility and capacity of hardware.

GENERAL ORDERING INFORMATION

1. Opening sizes - Interior or exterior; and design wind load

2. Desired clearances

3. Closer mfg. & model (prep or supply) hold open or no hold

4. Push/pull handle mfg. & model (prep or supply) location on door and hole diameter

5. Headers or jambs - if clad 3 side or bottom only; thresholds, etc.

6. Locks - cylinders and/or thumb turn; standard or dustproof strike

7. Other hardware or preps on door

8. Special field conditions - i.e. carpet, tile, etc..

Call your HGP Door Product Coordinator today. We'll help you turn your entrance design concepts into practical, gleaming reality.