HGP Industries Inc.
Laminated and Security
Glass-Clad Polycarbonates for Physical-Attack Resistance
Laminated and Security

GLASS - CLAD POLYCARBONATES FOR PHYSICAL-ATTACK RESISTANCE
Where high-strength, lightweight transparent attack resistance is required, ArmorSecure glass-clad polycarbonate security glass can satisfy the most demanding levels of physical attack. HP-Series products combine the penetration resistance, strength and light weight of polycarbonates with the heat and chemical resistance of heat-strengthened glass. HGP has Developed a full line of transparent glass-clad polycarbonate security products for every level of attack resistance - from jails, police offices and courtrooms, to hospitals, banks, jewelry stores, business offices and retail storefronts. For minimum to medium security needs, we offer HP configurations that feature heatstrengthened outer glass plies and single-ply polycarbonate core layers. For higher levels of security in areas that cannot be compromised, HP products with heat strengthened outer glass plies and multi-ply polycarbonate core layers provide increased protection against heavy prolonged physical attack. Most ArmorSecure HP security glass product are tested to WMFL 08801 or HP White standards to determine physical-attack and ballistics resistance performance. Copies of these test reports are available from HGP.
|
ArmorSecure Ballistic - Resistant No-Spall L-Series
PRODUCT |
NOMINAL |
POLYCARBONATE |
EXTERIOR |
PHYSICAL |
LOW-SPALL2 |
WEIGHT |
HP3861 |
3/8" |
1/16" |
1/8" |
N/A |
N/A |
3.9 |
HP7161 |
7/16" |
1/8" |
1/8" |
HP White A-I |
.38 Special |
4.4 |
HP7167 |
9/16" |
1/8" |
3/16" |
* |
* |
6.0 |
HP9162 |
9/16" |
1/4" |
1/8" |
HP White A-I |
.38 Special |
5.1 |
HP9167 |
11/16" |
1/4" |
3/16" |
* |
* |
7.0 |
HP11162 |
11/16" |
3/8" |
1/8" |
HP White A-II |
.38 Special, 9mm |
6.1 |
HP11164 |
11/16" |
** |
** |
WMFL 30 min.3
& HP White B-III |
* |
6.2 |
HP11167 |
13/16" |
3/8" |
3/16" |
* |
* |
7.7 |
HP13163 |
13/16" |
Three 1/8"Layers |
1/8" |
* |
* |
6.1 |
HP14164 |
13/16" |
** |
** |
WMFL 60 MIN. 3
& HP White
B-III/IV4 |
* |
7.0 |
HP15163 |
15/16" |
Two 1/8" Layers |
1/8" |
* |
* |
7.0 |
HP119443 |
1-3/16 |
** |
** |
WMFL Ballistic3
& |
.44 Magnum |
10.7 |
HP121553 |
1-3/16 |
Two 1/8" Layers |
1/4" |
* |
* |
10.8 |
1 |
All standard exterior glass plies are heat-strengthened; other options are available. |
2 |
If subjected to sufficient force, small glass fragments (spall) can be released to the protected side on impact |
3 |
HGP considers the WMFL test to be the superior attack standard. |
4 |
Sequence 26 completes Level III; sequence 39 completes Level IV; 8" x 5" opening after sequence 32; 8" x 8" opening after sequence 42. |
* |
These products are enhanced versions of lighter derivatives; they haven't been subjected to separate testing, but are expected to provide the same, or better, ballistic and physical-attack resistance than their fully tested derivatives. Talk to your HGP representative for full details. |
** |
HGP proprietary design. |




