architecture - engineering - construction
Horton Automatics
Automatic Entrance Systems
ICU/CCU Manual Sliding Doors
Automatic Entrance Systems

Unobstructed view of patients. |

ICU/CCU
Manual
Sliding Doors |
| Swings Open for Wide
Access Horton
Automatics intensive care unit (ICU) doors and cardiac care unit (CCU) doors are
manual sliding door systems with specific features and benefits to meet the requirements
of the health care market.
The ICU and CCU doors are of the same
proven, dependable, quality construction as our automatic sliding doors, which have been
withstanding abuse in high volume applications such as retail stores, hospitals and
airports.
Patients are always in full view through
the intensive care unit and cardiac care unit sliding glass doors, yet staff activity or
noise is not a factor. Patients rooms can be entered by using the sidelite (SO) as a
swing door or by going through the sliding door (X or SX). Should a large opening for fast
removal of a bed or equipment be required, both the sliding panel and the sidelite can be
swung out to provide this wide opening.
Consult factory for description,
application and limitations of low profile header and trackless bottom guide. See page 4
for some of the available door elevations.
Sliding panel(s) Easy access
and easy closure.
Breakout panel(s) For flexible
access and to provide largest possible opening for a fast removal of patient and bed or
other large equipment.
Two, three and four panel design
Meets all demands and can be customized according to circumstances.
Trackless bottom guide Ensures
maximum smoothness when something is moved in or out of the room. (Optional)
Broad glass panel Patient is
always in full view and yet undisturbed by staff activity or noise.
Manual positive latch Ensures that
the door will be held in closed position. (Optional)
|

Manually slides open

Swings into or out of room (SO-SX)

Full breakout (S)-SX) for wide access
|
Headers and Bottom Guides

Type 310
Shown with Trackless
Bottom Guide
Type310
Shown with track door
in the open position
|

Type 310 SO-SX-SX-SO |
 |
Optional Positive Latch
 |
Recessed Pull

1-1/4" w x 8-3/4" h (32 x 222)
On both sides of rail Standard on X and SX panels. |
|
|