Full Range Fluorescent Dimming - Page 5

Full Range Flourescent Dimming

Fluorescents already do a good job of combining quality lighting and energy efficiency. Hubbell’s advanced fluorescent dimming system gives you an even better opportunity to control your fluorescents and reduce energy costs.

A special feature provides system monitoring, delivering the lowest level of lighting specified by the system. If connected to a photosensor, occupancy sensor and time clock all three are continuously monitored and the input device requesting the least amount of energy is selected.

Manual wall switches, photosensors, occupancy monitors, or time clocks works as one with the Hubbell Fluorescent Dimming system. 

100% - 10% Output

Energy Savings - Versatile Lighting Levels

• T-8, T-5 electronic dimming ballasts
• 32, 25, 17W and 40W lamps
• 1, 2, and 3 lamp ballasts
• 120/277VAC

Available Controls

• Manual wallbox dimmer
• Photosensor
• Energy management system

Ballast Information

• T-8 dimming
• T-5 dimming

A single ballast controller works with up to 20 amps of fluorescent lighting on a circuit. So, you can effectively control a room with a variety of integrated sensors or timers.

ORDERING INFORMATION

Note: Consult factory for application information and product availability.
Note: Refer to product ordering information for fluorescent dimming selection.

Wiring Diagram