Hubbell Lighting Inc
Hubbell Lighting Buyers Guide\ 3 Downlighting and Track Lighting Products
8, 9, 12 Slope Ceiling Series - Page 7
Hubbell Lighting Buyers Guide\ 3 Downlighting and Track Lighting Products
|
8,9,12" Slope Ceiling Series |
A Lamp / R PAR Lamp Catalog Numbers: D208 / D308 / D408
Engineered specifically for sloped ceilings, these fixtures install easy and accommodate A lamps for good general lighting. Slope adapter is painted white, maximum slope, 30°.
ORDERING INFORMATION
ACCESSORY - Must be ordered separately
OPTIONS
|
|
Catalog |
Description |
Maximum Lamping |
Maximum Height |
|
D208 |
||||
A LAMP REFLECTORS |
||||
|
216W |
Clear Alzak |
150W A-21 |
11-3/4" |
217W |
Gold Alzak |
150W A-21 |
11-3/4" |
|
R/PAR LAMP CONES |
||||
|
116W |
Clear Alzak |
100W R/PAR 30 |
12-7/8" |
117W |
Black Alzak |
100W R/PAR 30 |
12-7/8" |
|
|
118W |
Gold Alzak |
100W R/PAR 30 |
12-7/8" |
119W |
Black Baffle |
100W R/PAR 30 |
12-7/8" |
|
Note: Slope must be specified in 5° degree increments, 30° maximum. For steeper slopes consult factory. TRIMS: Damp Location Listed |
Catalog |
Description |
Maximum Lamping |
Maximum Height |
|
D308 |
||||
A LAMP REFLECTORS |
||||
|
229W |
Clear Alzak |
200W A-23 |
14" |
230W |
Gold Alzak |
200W A-23 |
14" |
|
R/PAR LAMP CONES |
||||
|
126W |
Clear Alzak |
200W R40 / PAR 38 |
15¼" |
127W |
Black Alzak |
200W R40 / PAR 38 |
15¼" |
|
|
128W |
Gold Alzak |
200W R40 / PAR 38 |
15¼" |
129W |
Black Baffle |
200W R40 / PAR 38 |
15¼" |
|
Note: Slope must be specified in 5° degree increments, 30° maximum. For steeper slopes consult factory. TRIMS: Damp Location Listed |
Catalog |
Description |
Maximum Lamping |
Maximum Height |
|
D408 |
||||
A LAMP REFLECTORS |
||||
|
244W |
Clear Alzak |
300W PS25 |
16¼" |
245W |
Gold Alzak |
300W PS25 |
16¼" |
|
R/PAR LAMP CONES |
||||
|
136W |
Clear Alzak |
200 R40 / PAR 38 |
16-7/8" |
137W |
Black Alzak |
200 R40 / PAR 38 |
16-7/8" |
|
|
138W |
Gold Alzak |
200 R40 / PAR 38 |
16-7/8" |
139W |
Black Baffle |
200 BR3, BR40 / PAR 38 |
16-7/8" |
|
Note: Slope must be specified in 5° degree increments, 30° maximum. For steeper slopes consult factory.
|
















