| Fluorescents already do a good job of combining quality lighting and
energy efficiency. Hubbell’s advanced fluorescent dimming system gives you an even
better opportunity to control your fluorescents and reduce energy costs.
A special feature provides system monitoring, delivering
the lowest level of lighting specified by the system. If connected to a photosensor,
occupancy sensor and time clock all three are continuously monitored and the input device
requesting the least amount of energy is selected.
Manual wall switches,
photosensors, occupancy monitors, or time clocks works as one with the Hubbell Fluorescent
Dimming system.
100% - 10%
Output
Energy Savings - Versatile Lighting Levels
- T-8, T-5 electronic dimming ballasts
- 32, 25, 17W and 40W lamps
- 1, 2, and 3 lamp ballasts
- 120/277VAC
Available Controls
- Manual wallbox dimmer
- Photosensor
- Energy management system
Ballast Information
A single ballast controller works with up to 20 amps of
fluorescent lighting on a circuit. So, you can effectively control a room with a variety
of integrated sensors or timers.
 |
 |
 |
 |
Versaline® |
Recessed
Downlights
(except 13W) |
VS900 |
Parabolite®
|
ORDERING INFORMATION
Note: Consult factory for application information and
product availability.
Note: Refer to product ordering information for fluorescent dimming selection.
Wiring
Diagram
|
