Nationally recognized testing laboratory listed. Full
compliance to both UL and CSA standards.
For use in damp locations.

• 84% efficient luminaire
• 3" deep parabolic louver provides excellent cutoff, twelve cells (2x6)
• T-8 harmonic electronic ballast <10% THD
• Two lamps
• Integral grid clips
• Semi-specular low iridescent louver
• Louver hinges from either side
• High VCPs
• Nominal power density under 1w/ft²

 

The RDL84 series is the latest in high performance lighting products for today’s energy conscious consumers. The 84% efficient product allows the user to reduce energy consumption while maintaining high lighting levels. This series features 3" deep semi-specular low iridescent parabolic louver providing excellent cutoff without sacrificing performance. For applications that require wide distribution and low brightness, the RDL84 series is the answer.

This product uses a two lamp T-8, low harmonic distortion electronic ballast. A twelve cell louver provides the cutoff needed for applications where low brightness is required.

The RDL84 series is ideal for retrofitting existing three or four lamp fixtures and in new construction where users demand maximum energy savings.

Thermally-protected, resetting, Class P, low harmonic (120 and 277V <10% THD, 347V <20%THD) electronic ballast, sound rating A+, U.L. listed. Input watts-60.

TFN or THHN wire throughout — ballast leads extend minimum 6" through access plate — AFL-IBEW listed

Die formed 22 gauge steel. All optical components finished after fabrication

Twelve cell (2 x 6) semi-specular low iridescent parabolic louver

Fixture efficiency of 84% spacing criteria of 1.5, and LER of 71.

ORDERING INFORMATION

1. For other configurations—contact factory.

1. For additional details see Product Application.