Tribay™ Series (Highbay)

New Generation Of Specification Grade Industrial Lighting

Hubbell’ s New Family of Industrial Lighting
Tribay offers a variety of optics for all highbay and lowbay needs, whatever the industry — from textiles to automotive, paper to retail. Not for outdoor use or wind buffetted locations.

Hubbell Quik-Zone TM
Electrical/Mechanical Disconnect Option

UL listed for electrical make and break under load. Replaces power hooks for instant installation or removal and replacement of luminaires. Pendant or ceiling through-wire mounting. Mounting box may be shipped ahead of luminaires for installation. The Quik-Zone disconnect is UL listed for all system voltages and is marked upon installation with the correct line voltage. Only 3-5/16" high, it saves almost eight inches of additional mounting height needed for conventional power hooks. See mounting method under Options and refer to Accessories section for separate shipment of Quik-Zone boxes.

Features

• High performance acrylic reflectors free from glare and harsh shadows for unsurpassed visual comfort are available
• Energy-Saving switch level dimming option
• Corrosion resistant hardware
• Electro-Reg® metal halide system available (the efficiency of HPS, with white light performance)
• Superior 600 watt Super Sodium™ available (30,000+ hours lamp life, quick cold start, instant hot restrike)

Broad Range of Ballast Technology

• CWA, PLA, Mag-Reg, low-loss Mag-Reg
• Electro-Reg®, Super Sodium™ , Isolated Secondary
• Quad-Tap®, Tri-Tap, 220V/50Hz.
• Remote/Offset ballast housing option for restricted luminaire height applications
• 65° C ambient temperature rating on highbays — standard on 250 and 400 watt — ideal for harsh environment; ensures longer ballast lifes

Superbay 2.0

Tribay Superbay 2.0 is Hubbell’s top-of-the-line specification grade highbay. The heavy duty die cast Lektrocote ® finished aluminum housing stands up to the toughest environments. UL thermal listings assure long service life for ballast and electrical components.

• Optically superior 19" and 22" Anodal ® finished aluminum reflectors.22"H— including Electro-Reg ® , and 250 through 600W HPS).
• 250 through 1000W MH — including Hubbell’s no compromise Electro-Reg white light system in 250 and 400W
• 250 through 1000W HPS — including 600W Super Sodium™ with 30,000+ hours lamp life, quick cold start and instant hot restrike.
• Reliable long life ballasts — class H insulated — metal halide starting down to -20°C (-40°C for Electro-Reg) and high pressure sodium starting down to -40°C

Controlux 2.0

Controlux 2.0 is designed to provide superb workplace visual comfort and high vertical footcandles with state-of-the-art ballast/lamp systems. A precision optical design with very low surface brightness allows low mounting of this luminaire (10 to 25 feet). Square distribution improves overall illumination uniformity with 2:1+ fixture spacing. Suited for industrial areas where machinery or other vertical obstructions may cause shadows or uneven illumination with standard luminaires.

• Refractor is held in place with four stainless steel latches and one hinge for easy maintenance
• Square distribution for optimum photometric performance

Sample Catalog Number
CATALOG LOGIC

Sample Catalog Number
CATALOG LOGIC

Sample Catalog Number
CATALOG LOGIC

1. 250 and 400 MH only.   2. Single voltage designations for Electro-Reg, Mag-Reg or isolated secondary ballasts only.
3. For cord length replace X with length in feet - 2, 4, 6, 10 (2' std.)   4. For Voltage replace X₁ with 1 = 120V, 2= 208V, 3 = 240V. 4 = 277V, 5 = 480V, F =      347V.   5. Replace X with length - 6, 10, 12, 16. Luminaire retainers reduce risk of equipment falling. 7. 250/400W uses 19" optical. 600/1000W uses 22"      optical
Note:  For Motions Sensors and Switch Level Dimming Accessories see Controls

Specification Grade Lowbay
Superwatt 2.0

Superwatt 2.0 is specially designed to deliver comfortable, high-efficiency illumination for bothvertical and horizontal surfaces. With its 2.2:1spacing-to-mounting-height ratio, Superwatt 2.0 is well-suited for low and medium mounting-height applications like machine shops, assembly areas, aisle lighting and areas that require three dimensional, high illumination.

• Unique refractor provides up to 95% efficiency
• 27%+ uplight softens the brightness difference between the lamp and surrounding areas
• Maximum downward candlepower is projected at 55° from vertical for wide distribution. Tasks are illuminated without harsh shadows and light is projected onto work areas for optimum visibility, and reduced direct glare above 55°
• Specification grade HPS, magnetic regulator and low loss magnetic regulator ballast and Electro-Reg®, as well as standard ballastry are available
• The refractor is held in place with three stainless steel latches and one hinge for easy maintenance

ACCESSORIES - Must be ordered separately

1. 250 and 400 MH only.   2. Single voltage designations for Electro-Reg, Mag-Reg or isolated secondary ballasts only.
3. For cord length replace X with length in feet - 2, 4, 6, 10 (2' std.)   4. For Voltage replace X₁ with 1 = 120V, 2= 208V, 3 = 240V. 4 = 277V, 5 = 480V, F =      347V.   5. Replace X with length - 6, 10, 12, 16. Luminaire retainers reduce risk of equipment falling. 7. 250/400W uses 19" optical. 600/1000W uses 22"      optical
Note:  For Motions Sensors and Switch Level Dimming Accessories see Controls