AL Series
The Superbay I AL Series is designed for
illuminating stacks and rack areas. Its computer designed optical system directs the light where it
is needed most — on vertical surfaces of storage
racks and warehouse aisles.
Ballast Module
Rugged, two piece, die cast aluminum with corrosion resistant Lektrocote ® gray finish.
All electrical components are mounted
directly to the ballast module for maximum heat
dissipation and cooler operation.
See Series BL
Ballast Module for details.
Reflector
Spun from high purity Anodal® finished, heavy gauge aluminum. Field adjustable
reflector brackets provide multiple lighting distributions. Reflector has Anodal ® finish and a directional system to
provide a long and narrow distribution. Two parallel
internal panels reflect the light at high angles to provide high vertical illumination on
stacks. Two additional panels provide uniform illumination up and down the aisle.
Ordering Information
| Catalog Number1 |
Lamp
Wattage |
Spacing Criteria |
Weight |
| Wide |
Medium |
Lbs |
kg |
| METAL HALIDE2 |
| BL-175HX-AL3 |
175 |
1.7 |
1.5 |
22 |
10.0 |
| BL-250HX-AL3 |
250 |
1.8 |
1.5 |
23 |
10.4 |
| BL-400HX-AL |
400 |
1.8 |
1.5 |
23 |
10.4 |
| PULSE START
METAL HALIDE2 |
| BL-320WX-AL |
320 |
1.7 |
1.5 |
23 |
10.4 |
| BL-350WX-AL |
350 |
1.8 |
1.5 |
23 |
10.4 |
| BL-400WX-AL |
400 |
1.8 |
1.5 |
23 |
10.4 |
| HIGHT PRESSURE
SODIUM |
| BL-150SX-AL |
150 |
1.8 |
1.5 |
19 |
8.6 |
| BL-250SX-AL |
250 |
2.1 |
1.7 |
21 |
9.5 |
| BL-400SX-AL |
400 |
2.1 |
1.7 |
26 |
11.8 |
1. To specify ballast type, replace X
in catalog number: 5-480V, 8-QUAD-TAP® (120. 208, 240,
277V), 6-TRI-TAP (120, 277, 347V), (CSA Certified. For UL status, consult
factory.)
2. Mecury vapor lamps will operate on MH ballast.
3. Requires BL-LR-19 lens accessory.
Options
Factory installed. Order with fixture by adding suffix.
Accessories
Accessories are available for the Superbay I AL Series. They
must be ordered separately and installed in the field. Click on the Options button.
Mounting Accessories
Mounting accessories are available for the Superbay I AL
Series. They must be ordered separately and installed in the field. Click on the Options
button.
Quick Estimator
For use in determining average initial footcandles for typical
mounting heights and spacings. 50/30/20 room surface reflectances, BF = 0.95.
QUICK ESTIMATORS
Mounting
Height
(feet) |
Aisle
Width
(feet) |
Spacing
(feet) |
400 HPS1
— Position B Average 400 MH2 — Position D Average
Initial Footcandles
Initial Footcandles |
| Stacks |
Floor |
Stacks |
Floor |
| 20 |
6 |
20
30
40 |
58
39
29 |
57
38
28 |
42
28
21 |
47
30
23 |
| 8 |
20
30
40 |
54
36
27 |
56
37
28 |
40
27
20 |
45
30
23 |
| 25 |
6 |
20
30
40 |
47
31
23 |
45
30
23 |
35
23
17 |
37
25
19 |
| 8 |
20
30
40 |
45
30
22 |
45
30
22 |
33
22
16 |
36
24
18 |
| 30 |
6 |
20
30
40 |
40
27
20 |
38
25
19 |
29
20
15 |
31
21
16 |
| 8 |
20
30
40 |
38
25
19 |
38
25
19 |
27
18
14 |
30
20
15 |
1. For 250W HPS @ 27,500 lu/lp, multiply 400 HPS
values by a factor of 0.55.
2. For 400W MH @ 40,000 lu/lp, multiply listed 400 MH values by a factor of1.11.
SD SERIES
| Slick-on |
A |
B |
C |
D |
E |
F |
G |
| 9-1/2" |
2" |
9-1/2" |
23-5/8 — 25-7/8" |
13-1/4" |
11-3/4" |
18-7/8" |
| 241 mm |
51 mm |
241 mm |
600-657 mm |
337 mm |
299 mm |
479 mm |
| Quick-on |
9-1/2" |
1-1/8" |
8-5/8" |
22-3/4" — 25" |
13-1/4" |
11-3/4" |
18-7/8" |
| 241 mm |
29 mm |
219 mm |
530 — 581 mm |
337 mm |
299 mm |
479 mm |
|
