Quality four inch OD aluminum poles with .250 wall thickness are available in natural aluminum or matching Lektrocote^® finishes. With natural corrosion resistance, these beautiful standards have a flush hand hole and a one piece spun aluminum base cover.

These perfect supports for Magnudisc™ II are offered in 10, 12, 14, 16, 18 and 20 ft. mounting heights. All poles use TAB-30 hot dipped galvanized steel anchor bolts. Poles are double wrapped for shipping protection.

RSP Round Straight Steel

Rigid four inch OD steel poles with .220 wall thickness have exact color match Lektrocote^® finishes. Features include flush hand hole and one piece spun base cover to complete the round motif. Mounting heights available: 10, 12, 14, 16, 18 and 20ft. All poles use TAB-30 hot dipped galvanized steel anchor bolts.

Optional M55 Hubbell Seal™ is available for lasting internal pole protection against de-icing or airborne salts. Poles are double wrapped for shipping protection.

ORDERING INFORMATION - DS Series Poles
RAC Round Straight Aluminum

RSP Round Straight Steel

ACCESSORIES - DS Rigid Arms - Must be ordered separately

Magnudisc Pole Finishes
All DS poles are available in Lektrocote^® finishes with precise color match to the luminaire.
To order, specify suffix.

DM Series

RTA Round Tapered Aluminum
Beautiful round tapered aluminum shafts with .188 wall thickness finished in lasting Lektrocote^®. Mounting heights for 20, 25, 30 and 35 feet. Side drilled or tenon top for spoke styles. Decorative nut covers leave clean appearance at base. Poles are double wrapped for shipping protection. Natural satin finish available - consult factory.

RTS Round Tapered Steel
Strongest construction — RTS poles can be side drilled for one or two luminaries or tenon top for spoke fixtures. Sturdy 11 gauge shaft is offered in mounting heights of 20, 25, 30, 35 and 40 feet. Choose from the many Magnudisc™ colors for exact match with luminaire.

Optional M55 Hubbell Seal™ is available for internal pole protection against de-icing or airborne salts. Poles are double wrapped for shipping protection.

ORDERING INFORMATION - DM Series Poles

RTA Round Tapered Aluminum

Note: Spoke units require 2 3/8 OD tenon. ie: RTA-6201-PO-MXX. Arm units require XX replaced with a drilling location — A2 -single; C2 - twin; 180 etc.
Add finish from Pole Finish table.

RTS Round Straight Steel

Note: Spoke units require 2 3/8 OD tenon. ie: RTA-6201-PO-MXX. Arm units require XX replaced with a drilling location — A2 -single; C2 - twin; 180 etc.
Add finish from Pole Finish table.

OPTIONS

ACCESSORIES - DS Rigid Arms - Must be ordered separately

Magnudisc Pole Finishes

DM poles are available in Lektrocote^® finishes with precise color match to the luminaire.To order, specify suffix.

DS Series

DS Series