Magnuspec™ was specifically designed to illuminate large open spaces - and it does so with excellent uniformity. Its clean, geometric shape serves as a quiet complement to any building. Combine this exceptional design with the most energy efficient and effective light sources available and you’ll discover a truly brilliant performer - Magnuspec from Hubbell Lighting, Inc.

Units are available in arm mount for pole or wall and yoke mount for single post top applications. Use Hubbell poles to complete the package and have one point manufacturing and quality assurance.

Housing

• Two piece formed and welded aluminum
• Upper housing completely encloses all electrical components for weathertight protection
• Lower skirt holds reflector lip and lens door assembly
• Finish coat of 2 mils minimum Lektrocote^® powder, sealed at 400°F to aluminum for 4H pencil hardness and lasting color

Lens/Door Assembly

• Glass lenses are secured in a mitered extruded aluminum frame with solid corner key supports
• Four springloaded tool-free cast latches allow door to be opened from either end for quick maintenance
• Lenses are sealed to housing with a high qualitygasket
• Sag glass lens allow high angle illumination toescape the fixture for wide spacings and greateruniformity on vertical lamp units. A flat glass lensis provided on horizontal lamp fixtures.

Powr-Panl^®

• Ballast components mounted to a galvanized steel removable panel with electrical quick connects for power and socket on vertical lamp units
• Horizontal lamp fixtures have hard mounted ballastry for excellent heat dissapation.
• Ballasts are H.P.F. 180°C insulated with -20°F
• (- 40°F HPS) starting
• 60 Hz. standard - 50 Hz available
• Available in 400 and 1000 watt metal halide, 600watt Super Sodium™ and 400 watt Electro-Reg^® and 1000 watt HPS (HP distribution only)

Optical

• Reflector systems are made from multi-faceted segmented aluminum panels and factory set in a tool-free rotatable assembly
• Vertical lamp units feature a heavy duty springloaded porcelain mogul base socket for positive contact and anti-vibration strength
• Vertical distributions are available in I.E.S. Type I, III, V Square, modified Type IV with house side shielding
• Horizontal lamp reflectors include a modified Type IV with house side shielding from a multi-piece design and a Type III asymmetric pattern from a one piece hydroformed offering
• Universal burning mogul base lamps are supplied with each luminaire (1000W MH lamps are BT37 size)

Mounting

• Arm mount allows the use of multiple fixtures per pole for higher lighting levels
• Arm mounts can utilize Hubbell’s wide selection of arms for additional mounting versatility
• Yoke mount features 2" square aluminum supports for post top applications on 2 3/8" O.D. tenons

Listing

• All units are UL listed 1572 for wet locations and CSA-NRTL/C certified for indoor/outdoor use
• IP suitability IP55

ORDERING INFORMATION: Horizontal Lamp Fixtures

1. For post top yoke mount change A to Y — Yoke EPA 3.5 ft.2 For 480 volt change 8 to 5. For other colors change -1 Bronze to -2 Black, -3 Gray, -4 White. Lamp included on all units.
Note: EPA shown is with flat lens, add .13 for sag lens.

Sample Catalog Number
CATALOG LOGIC: Vertical Lamp Fixtures

1. Consult factory for availability

Sample Catalog Number
CATALOG LOGIC: Vertical Lamp Fixtures

ACCESSORIES

Note: To designate finish, replace X with: 1-Bronze, 2-Black, 3-Gray, 4-White, 6-Beige, 7-Forest Green, 8-Terra Cotta, 9-Teal, B-Blue, R-Red, G-Golden Rod, M-Mauve, O-Other.

ACCESSORIES

Note: To designate finish, replace X with: 1-Bronze, 2-Black, 3-Gray, 4-White, 6-Beige, 7-Forest Green, 8-Terra Cotta, 9-Teal, B-Blue, R-Red, G-Golden Rod, M-Mauve, O-Other.