Magnuspec™ MSS Series

Square Cutoff Specification Grade

The compact MSS Series Magnuspec™ is a versatile luminaire for many lighting applications. The 16" square housing accommodates a wide range of optical systems allowing maximized lighting utilization. A removable ballast Powr-Panl^® provides ease of installation and maintenance. Couple the excellent photometric capability with four mounting arrangements and MSS Magnuspec becomes a key element in many of your lighting designs.

Housing

• Rugged, one-piece aluminum, formed and welded for long term weather protection. An internal galvanized steel end support adds rigidity for mounting
• Finish coat of Lektrocote^® powder, minimum 2 mils. thick and sealed to aluminum at 400°F for lasting color and 4H pencil hardness

Lens/Door Assembly

• Lenses are secured in a mitered extruded aluminum frame with solid corner key supports
• Four springloaded, tool free cast latches allow door opening from either end for quick maintenance
• Lenses are sealed to housing with a high quality gasket
• Lenses are tempered, high impact resistant glass on flat lens units. Drop refractors and a Type V distribution are offered in acrylic and polycarbonate

Powr-Panl^®

• Ballast components mounted to a galvanized steel removable panel with electrical quick connects for power and socket.
• Ballasts are H.P.F. 180°C insulated with -20°F (-40°F HPS) starting. 60 Hz standard — 50 Hz available.

Listings

• All units are UL listed 1572 for wet locations and CSA-NRTL/C certified for outdoor use. IP suitability IP55.

Optical

• Reflector systems are made from multi-faceted segmented aluminum panels, factory set in a tool
• free rotatable assembly
• Five flat glass optics are available for maximum cutoff distribution utilization: Type I, III, IV, V sq. from horizontal lamp and V sq. vertical lamp
• Two drop refractors are available producing a Type V distribution: acrylic and polycarbonate
• All units have medium base pulse rated porcelain sockets and are shipped less lamp

Mounting

• Arm mount allows use of multiple fixtures per pole for higher lighting level
• Yoke mount features 1 1/2" square aluminum supports for post top applications on 2 3/8 - 3" OD tenons
• Ceiling mount comes complete with instructions for surface attachment
• Garage mount is specifically designed for parking garages with prewired wet location cord and adjustable mounting supports

ORDERING INFORMATION:


Note: Catalog numbers are arm mount housings, Quad-Tap® ballast and bronze finish.

For other mountings change A to C - Ceiling, Y - Yoke Post-Top, G - Garage.

For photometric distribution replace X with I - Type I, P - Type III, T - Forward Throw, W - Type V Horizontal, V - Type V Vertical, A - Drop acrylic Type V and L - drop polycarbonate type V.

For other voltage change Quad-Tap 120/208/240/277V 8 to 5 for 480V, 6 for Tri-Tap® 120/277/347V.

For other finishes replace 1 with 2 - Black, 3 - White, 6 - Beige, 7 - Forest Green, 8 - Terra Cotta, 9 - Teal, B - Blue, R - Red, G - Goldenrod, M - Mauve, O - Other.

For 50 Hz. ballast consult factory. EPA shown is with flat lens, add .35 for flat lens.

Sample Catalog Number
CATALOG LOGIC

1. Field adjustable to type II.
2. Not available in 70 and 100W metal halide.

Sample Catalog Number
CATALOG LOGIC:

1. Substitute voltage for X (1-120; 2-208; 3-240; 4-277; 5-480; 6-347V).

Note: Order accessories separately. See Accessories.

ACCESSORIES - Must be ordered separately

Note: To designate finish, replace X with: 1-Bronze, 2-Black, 3-Gray, 4-White, 6-Beige, 7-Forest Green, 8-Terra Cotta, 9-Teal, B-Blue, R-Red, G-Golden Rod, M-Mauve, O-Other.