The MSV Series is the perfect solution to large area cutoff illumination needs in the commercial marketplace. It uses high technology optical design mated with a strong housing structure to produce one of the best lighting values offered today. The excellent uniformity from the vertical lamp allows maximum spacings from lower mounting heights.

Optical Choices

• Available in IES Type I, III, IV and V square distributions
• Each reflector system is multi-segmented and rotatable for performance and versatility
• Sag glass lens provided on every unit allows high angle illumination to escape the housing and give wider spacings for pole locations

Housing/Ballastry

• One piece formed and welded aluminum housing protects internal components from the weather
• Galvanized steel inner supports provide high strength and hold ballast and mounting components
• All outer surfaces protected by Lektrocote^® powder paint
• One piece lens gasket seals to reflector providing protection from dirt and insects
• Offered in 1000 or 400 watt MH and 400 watt HPS
• All units are high power factor and are available in Quad-Tap (120/208/240/277), Tri-Tap 120 / 277 / 347V) and 480 volt

Additional Features

• All fixtures supplied with lamp
• A selection of mounting arms and adapters allow use on new or existing poles
• Hubbell SSP steel or SAP aluminum poles are recommended

• Specification grade polyester powder coating, minimum two mils thick and baked on at 400°F for lasting hard finish

ORDERING INFORMATION:


Note: All units are Quad-Tap® 120 / 208 / 240 / 277V. For 480V change 8 to 5. For Tri-Tap 120 / 277 / 347V use 6. All units are bronze Lektrocote^® - for optional colors change 1 to 2-black, 3-gray, 4-white.
1. Lamp included

ACCESSORY - Must be ordered separately. For field installation.

ACCESSORY - Must be ordered separately. For field installation.

OPTIONS: Order with suffix on fixture — arm painted to match fixture.