Magnuspec™ was designed to illuminate large open spaces — and it does so with excellent uniformity. Its clean, geometric shape serves as a quiet compliment to any building. Combine this exceptional design with the most energy efficient and effective light sources available and you’ll discover a truly brilliant performer — Magnuspec.

Units are available in twelve colors and feature exacting photometry from both horizontal and vertical lamps. Three mountings: arm, yoke and ceiling allow tremendous application flexibility. Use Hubbell poles to complete the package and you have one point manufacturing and quality assurance.

Housing

• Rugged, one piece aluminum, formed and welded for long term weather protection.
• Finish coat of Lektrocote^® powder, minimum 2 mils. thick and sealed to aluminum at 400°F for lasting color and 4H pencil hardness.

Lens/Door Assembly

• Glass lenses are secured in a mitered extruded aluminum frame with solid corner key supports.
• Four springloaded, tool free cast latches allow door opening from either end for quick maintenance.
• Lenses are sealed to housing with a high quality gasket.
• Horizontal lamp units are standard with flat glass, sag glass optional.
• All vertical lamp units have sag glass standard and are shipped with lamp.

Powr-Panl^®

• Ballast components mounted to a galvanized steel removable panel with electrical quick connects for power and socket.
• Ballasts are H.P.F. 180°C insulated with -20°F (-40°F HPS) starting. 60 Hz standard — 50 Hz available.

Optical

• Reflector systems are made from multi-faceted segmented aluminum panels, factory set in a tool free rotatable assembly.
• Vertical lamp units feature a heavy duty springloaded porcelain mogul base socket for
• positive contact and anti-vibration strength.
• Vertical distributions are available in IES. Type I, III, IV and V Square.
• Horizontal lamp assemblies have a position oriented mogul socket on all units for use with HPS and universal or high output metal halide lamps.
• Available distributions include: IES: I, III, IV and V Square.

Mounting

• Arm mount allows use of multiple fixtures per pole for higher lighting levels.
• Arm mounts can utilize Hubbell’s wide selection of arms for additional mounting versatility.
• Yoke mount features 2" square aluminum supports for post top applications on 2 3/8" OD tenons.
• Ceiling mount comes complete with instructions for surface attachment.

Listing

• All units are UL listed 1572 for wet locations and CSA-NRTL/C certified for outdoor use.
• IP suitability, IP55

ORDERING INFORMATION:

2. Lamp included on vertical lamp distributions - standard universal burning. (metal halide 400 watt ED28 shape)

Note: For ceiling mount: change A to C, for yoke mount change A to Y. (add 15 lbs) EPA shown is with flat lens, add .13 for sag lens.

Insert distribution designators in the XX logic of the catalog number. Horizontal units have flat lens and vertical units have sag lens standard.

Units shown are Quad Tap® (120/208/240/277 volt.) For 480 volt change 8 to 5.
For Tri-Tap® (120/277/347 volt) change 8 to 6.

Units shown are dark bronze. For other finishes refer to catalog logic and change -1 to appropriate number/letter.

Sample Catalog Number
CATALOG LOGIC: Vertical Lamp Fixtures

Sample Catalog Number
CATALOG LOGIC: Vertical Lamp Fixtures

Note: Order accessories separately. See Accessories.

MOUNTING ACCESSORIES

Note: To designate finish, replace X with: 1-Bronze, 2-Black, 3-Gray, 4-White, 6-Beige, 7-Forest Green, 8-Terra Cotta, 9-Teal, B-Blue, R-Red, G-Golden Rod, M-Mauve, O-Other.

MOUNTING ACCESSORIES

Note: To designate finish, replace X with: 1-Bronze, 2-Black, 3-Gray, 4-White, 6-Beige, 7-Forest Green, 8-Terra Cotta, 9-Teal, B-Blue, R-Red, G-Golden Rod, M-Mauve, O-Other.