Nitetorch^® II NT Series (Continued)

RAC poles are available with a 3" OD open top for single mounting or with 2 3/8" OD tenon for use with multiple brackets.

Handholes include a 3"x4" reinforced frame with cover. Anchor bolts include four "L" shaped bolts per set with two nuts and two washers each. Bolt template included. Standard finish on all aluminum poles is rotary sanded satin aluminum.

ORDERING INFORMATION: Round Straight Aluminum Poles - RAC Series

2. Must order NT-TA accessory for proper fit.
3. Maximum allowable EPA is based on steady winds of 80 and 100 MPH with gusts to 104 and 130 MHP respectively. All calculations based on a minimum yield of 36,000 PSI.
4. Factory supplied template must be used when setting anchor bolts. Hubbell Lighting will deny any claim for incorrect anchorage placement resulting from failure to use factory supplied template.
5. Anchor bolt weights are not included.
6. The following Lektrocote® finishes are available by adding the appropriate suffix: M50 Black, M51 Bronze, or M53 Gray

RSP poles are available with 3" OD open top for single mounting. For multiple brackets, pole is available with 2 3/8" OD tenon or handhole. Handholes include 3x4" reinforced frame with cover. Pole base cover included. Anchor bolts include four "L" shaped bolts per set with two nuts and two washers each. Bolt template included. Treated with rust preventive primer.

ORDERING INFORMATION: Round Straight Steel Poles - RSP Series

2. Must order NT-TA accessory for proper fit.
3. Maximum allowable EPA is based on steady winds of 80 and 100 MPH with gusts to 104 and 130 MHP respectively. All calculations based on a minimum yield of 36,000 PSI.
4. Factory supplied template must be used when setting anchor bolts. Hubbell Lighting will deny any claim for incorrect anchorage placement resulting from failure to use factory supplied template.
5. Anchor bolt weights are not included. The following Lektrocote® finishes are available by adding the appropriate suffix: M50 Black, M51 Bronze, or M53 Gray