 The Perimaliter is an
energy saving area luminaire that combines efficient lighting, and aesthetic appearance.
It is designed for maximum spacing between luminaires and can provide good uniformity at a
six to one spacing to mounting height ratio, utilizing energy efficient HID lamps.
Lighting Applications
The Perimaliter Series is ideally suited for security
lighting applications as well as commercial and architectural exterior wall and area
lighting for parking lots, office buildings, stores, shopping centers, fast food
restaurants, banks, warehouses, and parking garages.Typical mounting height is 20-25 feet
(7 meters).
Refractor/Door
Full front access is available by hinging front door. Two
HubbellGard® hex head fasteners provide tight seal to door gasket. Die cast
aluminum door frame securely holds prismatic borosilicate glass refractor. Lens is thermal
shock and impact resistant. Engineered to out perform industry standard four to one
spacing to mounting height glass wall packs. Door assembly hinges or can be completely
removed for easy front access.
Rear Housing
One-piece, heavy duty, die cast aluminum for long life and
cooler operation. Bronze Lektrocote® finish is standard. Mounts over 3
1/2" or 4" recessed junction box. Two 1/2" side entries for surface conduit
mounting.
Reflector
Precision formed specular aluminum for optimum performance.
Ballast
Class H insulated, -40°F starting (-20°F for MH), 60 Hz
HPF. An aluminum ballast compartment cover isolates electrical components from the optical
assembly
Additional
Features
- Bronze Lektrocote® finish standard
- Side photocontrol hub (order field installed PBT Series)
- Post top mounting accessory (PVL-PT) for single or back to
back installations
- Porcelain mogul base socket
- Through branch rated for 90° wiring
- Front door and gasket design is capable of withstanding
UL595 marine hose down
- Rated IP-55
ORDERING INFORMATION
Note: For electrical data,
see HID Ballast
& Lamp Data.
Note: Units are Quad-Tap® (120, 208, 240,
277V). For Tri-Tap® (120, 277, 347V) change 8 to 6. For 480V change 8 to 5. Standard
finish is dark bronze. Units have mogul base sockets, lamps not included.
Note: Accessories must be ordered separately. See Accessories.
ACCESSORIES: Must be ordered separately
OPTIONS: The following options are factory
installed — add appropriate suffix
|
