Homepage  
Search
find:
search for:
   
 
Site Navigation
News / Publications
Jobs
Service
   Add this page to Google Bookmarks
   Add this page to Mister Wong
   Add this page to del.icio.us
 
   Hubbell Lighting Inc  Hubbell Lighting Buyers Guide\ 9 — Technical  

6 and 12 Volt Systems - Page 9

 

 

hublogo.jpg (8655 bytes) 6 and 12 Volt Systems

Isofootcandle curves are based on illumination at 87- 1/2% of nominal battery voltage (end of battery life.) Illumination levels at the beginning of the discharge cycle (Beam penetration) will be approximately 20% greater than shown. The National Electrical Code limits voltage drop to a maximum of 5% of nominal. The table shows the maximum length of a given battery circuit, assuming that the total load is concentrated at the end of the load circuit.

If loads are uniformly spaced (equal watts, equal distances) along the circuit path, all of these distances may be increased, based on the number of heads or fixtures on a given circuit. This may permit a savings by the use of a smaller wire size (see wiring distance formula table.)

Distributed Load Circuit Distance Adjustment Table
Number of Heads 2 3 4 5 6
Multiply Feet by 1.33 1.5 1.6 1.67 1.71

For example, a 36 foot long, 6V circuit has 7W heads spaced 12 feet apart. According to the voltage drop table, #10 wire must be used at 43 feet for a 5% voltage drop. But, multiplying the 27 feet for #12 wire by 1.5, a 40-1/2 foot wire run is acceptable. Therefore, #12 wire may be used and still meet the 5% voltage drop limitation.

Wire size determinations can be made for non-uniformly spaced loads. But for ease and safety, it is 2267 ÷ 44 = 51W; on #10 wire, 3604 ÷ 44 = 82W.) would be advisable to use the voltage drop tables.

For a precise determination of the maximum length of wire run for a concentration load (before applying the adjustment for uniformly distributed loads), divide the total load in watts into the constant at the bottom of each row. (Example: the maximum wire run for #12 wire on a 12V system, with a 44W load, is 2267 ÷ 44 = 51W; on #10 wire, 3604 ÷ 44 = 82W.)


Total Watts on
Wire Run
6 Volt Circuit Length Wire 12 Volt Circuit Length Wire
Wire Gauge Wire Gauge
12 10 8 6 12 10 8 6
6 94 150 238 379 378 600 955 1518
7 81 129 204 325 324 515 818 1301
8 70 112 179 284 283 450 716 1138
10 56 90 143 227 226 360 570 910
12 44 70 112 178 178 283 450 715
14 40 64 102 162 162 257 409 650
16 33 53 84 134 133 212 338 538
18 30 47 75 119 119 189 300 477
20 28 45 71 114 113 180 286 455
21 27 43 68 108 108 171 273 434
24 24 38 60 95 89 141 225 357
25 21 34 54 86 86 136 216 344
28 20 32 51 81 81 129 206 325
30 19 30 48 76 75 120 190 303
32 16 26 42 67 66 106 168 268
35 15 25 39 63 65 103 164 260
36 14 23 37 59 59 94 150 238
40 13 21 33 53 53 85 135 214
42 13 21 34 54 54 86 136 217
48 11 17 28 44 44 70 112 175
49 11 18 29 46 46 73 117 186
50 11 17 27 43 43 68 108 172
54 10 16 25 40 40 63 100 159
56 9 15 24 38 38 60 96 153
60 8 14 22 35 35 56 90 143
64 8 13 21 33 33 53 84 134
70 8 13 20 32 32 51 82 130
72 7 11 18 29 29 47 75 119
75 7 11 18 29 28 45 72 115
80 6 10 16 26 26 42 67 107
84 5 10 16 25 25 40 64 102
88 6 9 15 24 24 38 61 97
90 6 9 15 24 24 38 60 95
96 5 8 14 22 22 35 56 89
100 5 8 14 21 21 34 54 86
104 5 8 12 20 20 32 51 82
108 4 7 12 19 19 31 50 79
112 4 7 12 19 18 30 48 76
120 4 7 11 17 17 28 45 71
125 4 7 11 17 17 27 43 69
126 4 7 11 17 17 27 43 68
128 4 6 10 16 16 26 42 67
132 4 6 10 16 16 25 40 65
136 3 6 9 15 15 24 39 62
144 3 5 9 14 14 23 37 59
150 3 5 9 14 14 23 36 57
152 3 5 8 14 14 22 35 56
156 3 5 8 13 13 21 34 55
160 3 5 8 13 13 21 33 53
162 3 5 8 13 13 21 33 53
168 3 5 8 12 12 20 32 51
175 3 5 8 12 12 19 31 49
176 3 4 7 12 12 19 30 48
180 2 4 7 11 11 18 30 47
184 2 4 7 11 11 18 29 46
192 2 4 7 11 11 17 28 44
198 2 4 7 11 11 17 27 43
200 2 4 6 10 10 16 27 42
Constant 567 901 1432 2277 2267 3604 5730 9109

Request for Information / Request a Catalog from Hubbell Lighting Inc
 
 
 
To request more information from Hubbell Lighting Inc, please complete the form below.
 
*Name:    
*Email:    
Company:    
*Company type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.  
     






Printable version Bookmark this page Notify a colleague or friend about this pageHome | Terms of Use | Privacy Statement | Link to AECinfo
AECinfo is a member of Docu Group, the world's largest building products information network.



Copyright © 1996–2008 AECinfo.com