Wiring Devices & Systems (Hubbell Wiring Device-Kellems)

Safety Devices
Switched Enclosures
CIRCUIT-LOCK^® 30, 60, and 100 Ampere Unfused Disconnect Switch

UL LIsted, CSA Certified
TYPE 4, 4X and 12K Enclosure Rating

The new CIRCUIT-LOCK disconnect Switch meets NEC Article 430 requirements for a separate disconnect means within sight of all motor loads. In addition, the enclosure offers the ability to lock directly wired motor loads in the "OFF" position to comply with OSHA Lockout/Tagout regulations. This safety enclosure is Type 4X (Washdown, Corrosion resistant) and is also suitable for use on metallic conduit. The switch is mounted on an internal frame that is integral with the enclosure and bonds all grounds, and it accepts auxiliary contacts that can be used to signal PLC controllers.

Key	30A Inch	mm	60A/100A
Key	30A Inch	mm	inch	mm
A	6.00	152	8.75	222
B	5.12	130	7.75	197
C	4.12	105	4.75	121
D	6.62	168	8.00	203
E	7.62	194	9.95	253
F	8.50	216	11.00	279
G	4.12	105	5.94	151

Ordering Information 30A, 60A and 100A
Description	Catalog Number
30A CIRCUIT-LOCK disconnect switch.	HBLDS3
30A CIRCUIT-LOCK disconnect switch with aux. contact.	HBLDS3AC
60A CIRCUIT-LOCK disconnect switch	HBLDS6
60A CIRCUIT-LOCK disconnect switch with aux. contact.	HBLDS6AC
100A CIRCUIT-LOCK disconnect switch.	HBLDS10
100A CIRCUIT-LOCK disconnect switch with aux. contact.	HBLDS10AC
Auxiliary contact for 30A switch, A600 pilot duty.	ACSE30
Auxiliary contact for 60A and 100A switch, A600 pilot duty.	ACMI60

Horsepower Ratings
Voltage	30A Horsepower - HP	60A Horsepower-HP	100A Horsepower-HP
120 V AC	1 HP	3 HP	5 HP
208V AC	-	-	10 HP
208-240V AC	2.5 HP	7.5 HP	-
240-277V AC	-	-	15 HP
480V AC	5 HP	20 HP	30 HP
208V AC	-	-	20 HP
208-240V AC	5 HP	15 HP	-
240V AC	-	-	25 HP
480V AC	10 HP	30 HP	50 HP
600V AC	10 HP	40 HP	50 HP
* Note: See page G-14 for technical data.

Dimensions in Inches (mm)

Wiring Device-Kellems