Capacity-certified track systems.

A quality track system is the key to years of fast and easy partition movement. It will save money by minimizing setup and takedown as well as downtime for repairs.

Job site conditions vary which is why we offer a wide selection of track systems to meet your needs. Each has been life cycle tested for a minimum of 100 miles (approximately 10 years of use) - further assurance of proven quality.

Hufcor track systems, like our panels, may be modified to meet specific job site conditions. Flush mounting or challenges with the existing overhead structure can be accommodated. Just contact your local Hufcor distributor.

ALUMINUM TRACK SYSTEMS

Hufcor's durable, corrosion-resistant aluminum track systems are easy to install and easier to maintain. Extruding enables each section to have a uniform shape for superior end-to-end alignment. Each capacity-certified track is of extruded architectural grade clear anodized 6063-T6 aluminum and includes these features and benefits:

• Rated at 31,000 psi.
• 204R-1 anodized coating ensures a smooth, hard running surface, and prevents oxidation.
• Unitized design prevents sound leaks, protects the ceiling, and provides for suspension components, plenum enclosure and alignment pins.
• Alignment pins tightly align track joints - important for long carrier life.
• Welded and steel-reinforced intersections.
• Quiet carrier operation.

TYPE 26 OMNI-DIRECTIONAL TO 500 LBS.

For Omni-Directional panels up to 500 lbs. (227kg). Two carriers are provided per panel. Each carrier has two horizontal counter-rotating wheels that roll (not slide) in the track. Each wheel has precision ground bearings, encased with Delrin for quiet operation. Carriers easily negotiate square or angled corners without switches. Minimum dimension from the ceiling to the structure is 8".

HUFCOR EXCLUSIVE

TYPE 36^® OMNI-DIRECTIONAL TO 1000 LBS.

For Omni-Directional panels up to 1000 lbs. (455kg). Patented by Hufcor, this unique track and carrier system is the world's most imitated. Two carriers are provided per panel. Each carrier has two horizontal counter-rotating wheels that roll (not slide) in the track. Each wheel has precision ground bearings, encased with Delrin for quiet operation. Carriers easily negotiate square or angled corners without switches. Minimum dimension from the ceiling to the structure is 8".

TYPE 38 PAIRED PANELS TO 400 LBS.

For Paired Panels and Manual Trains up to 400 lbs. (182kg). One 4-wheeled carrier is provided per panel. Each wheel is of molded polymer tries on hardened steel ball bearings. Minimum dimension from the ceiling to the structure is 8".