|
10650/HUF • BuyLine 3200
TYPE 40 PAIRED AND MANUAL TRAINS TO
700 LBS.
For Paired Panels and Manual Trains up to 700
lbs. (318kg). One 4-wheeled carrier is provided per panel. Each wheel consists of molded
polymer tires on hardened steel bearings. Resilient mounted body for quiet operation and
load distribution. Minimum dimension from the ceiling to the structure is 8".
TYPE 42E ELECTRIC TRAINS TO 700
LBS.
For Electric Trains up to 700 lbs. (318 kg). One 8-wheeled
carrier is provided on each panel - four wheels ride in overhead track and four in the top
panel rail to ensure smooth, even folding action. Each wheel consists of molded polymer
tires on hardened steel bearings. Resilient mounted body, for quiet operation and load
distribution. Minimum dimension from the ceiling to the structure is 16".
TYPE 57®
OMNI-DIRECTIONAL TO 1500 LBS.
For Omni-Directional panels weighing between 1000 and 1500
lbs. (455-680kg). Two carriers are provided per panel. Each carrier has two horizontal
counter-rotating wheel s that roll (not slide) in the track. Each wheel has precision
ground bearings, encased with Delrin, steel banded and reinforced. Carriers easily
negotiate square or angled corners without switches and may be programmed for
self-directing and sorting. Minimum dimension from the ceiling to the structure is
12" (305).
STEEL TRACK SYSTEMS
Hufcor Steel Track is used when the partition height or
weight limit exceeds that recommended for the aluminum system. The tracks have been load
tested a minimum of 100 miles (approx. 10 years of use.)
TYPE 11 PAIRS, OMNIS AND ELECTRIC
TRAINS.
For Pairs and Electric Trains weighing up to 1500 lbs.
(680kg) and Omnis weighing up to 3000 lbs. (1364kg) per panel. The track is of 1/4"
(6) formed black painted steel. The track trim is clear anodized aluminum. all
intersections are factory assembled and welded. Curves, diverters or switches are
available. One carrier is provided per panel for pairs and trains; two carriers per panel
for omnis. Each carrier has four steel wheels with precision ground radial bearings.
Bearings are inserted into a steel tire. The steel tire rim fully captures the bearing.
Carriers may be programmed for self-directing and sorting. Minimum dimension from the
ceiling to the structure is 12"; the minimum becomes 16" when used with electric
partitions.
TYPE 53 OMNI-DIRECTIONAL TO 1500
LBS.
For Omnis weighing up to 1500 lbs. (680kg). The track is
constructed of 7 ga. hot rolled steel and is painted black. The track trim is of clear
anodized aluminum. All intersections are reinforced and welded. Two carriers are provided
per panel. Each carrier has two horizontal counter-rotating steel wheels. Each wheel has
four tapered roller bearings and a press fitted Delrin running surface for quiet
operation. Minimum dimension from the ceiling to the structure is 12".
| TRANSFER
TRACK" TIP Hufcor strongly recommends
installing a "transfer track," a parallel track system, in busy multi-use
conference centers and hotels. This "transfer track" allows you to setup or
breakdown a room without interrupting an adjacent session. This saves setup time and helps
hotels and convention centers accommodate more meetings.
The "transfer track" can also be used to set up
parallel panels. A double wall can be formed for better acoustical separation between
extremely noisy events.
The inset shows a diagram of the parallel "transfer
track". Panels dividing Rooms 1 and 2 can be removed and stored without disturbing
Room 3.
|
|
