The MULTI-CLAMP Bulkhead Spacer is designed to allow adapters for the
2" HC-1 6 Series MULTI-CLAMP to be applied to the 3" HC-32 Series MULTI-CLAMP
The Bulkhead is a rugged molded thermoplastic elastomer that can withstand the effects of
most oils, chemicals, and cleaning compounds from -48°F to 275°F
The features and benefits of the MULTI-CLAMP Bulkhead Spacer:
All of the HC-16 Series Junction Adapters can be used in the HC-32 Series MULTI-CLAMPS
The need for bulky and heavy adapters and bushing reducers is eliminated
The cost to apply the junction adapters is reduced to approximately 1/6 of the previous
cost to do the same job
Metal to metal contact is replaced by an elastomer that is actually a cushion that will
reduce noise while absorbing shock and vibration
A Living Hinge allows the MULTI-CLAMP Bulkhead Spacer to be spread apart for quick and
easy installation
Now the Junction adapters can be utilized in the HC-32 Series Clamps easier, quicker, at
much less cost, and the clamping system is improved considerably. The elimination of
the bushing reducers means less potential leak problems and the cushion effect will
benefit any industrial clamping system.
How To Order
Specify the Bulkhead Spacer by part number HC-32-BS-16
