Holeless, roped hydraulic elevator with Elevette or Elevette 2100 car

Specifications

TS/Technical Support

Furnish and install Inclinator Company of America to travel a distance of _____ feet and _____ inches, serving _____ stops and _____ door openings. (9" min pit - 8'- 0" min overhead)

The shall have a capacity of 750 pounds and a speed of 30 feet per minute.

Electric Requirements - operates on available power supply, such as 208,230 volts 60 Hz single phase alternating current or 208,220,440 volts three phase, 60 Hz. 50 Hz equipment available for export. Control voltage is 24 volts.

For operation on _____ volts _____ phase _____ Hz.

The lifting system shall consist of a high quality hydraulic jack, hydraulic pump and 2-3/8" x 8 x 19 improved plow steel cables. Monorail and trolley shall be provided along with type "A" safties. The system shall have passenger controlled and manual lowering devices and pit and car top stop switches.

Power unit shall be located at ______________________ (specify which floor).

The car shall be _____ inches in depth (distance out from rail) and _____ inches in width. Elevette car height 6' -7' or 7'0". Elevette 2100 7'0" overall. (max D dimension 36"-max W dimen. 52")

Choose one of the following car descriptions.

Elevette 2100 car shall be constructed of _____ 3/8" veneer panels, _____ plastic laminate panels, _____ painted veneer, acrylic mirror or clear or tinted acrylic, _____ unfinished veneer panels. (specify color where required _____.)

Elevette car shall be constructed of _____ auto steel panels, _____ plastic laminate covered panels, _____ all hardwood car (give wood choice) _____ raised panel wood car. Color card or wood sample will be furnished manufacturer for solid or grained finish _____. Other type _____ (give details).

The car shall be equipped with _____ collapsible floating safety gates (see car code arrangements lower left), and one wooden hand rail. Swing type shaft doors shall be electrically and mechanically interlocked.

Advise if necessary for gate to reject 3" ball. Yes ____ No ____

Controls shall be momentary pressure, automatic type, with call buttons at each floor and a bank of car control buttons with a stop button and light switch.

Terminal and overrun limit switches shall be furnished along with slack rope and low pressure switches, and an anticreep device.

Car lighting can be swivel, surface mounted fluorescent or full fluorescent ceiling or down lights.

Optional Equipment-Gate safety bar, gate open alarm, brass handrail, folding shelf, key switch operation, telephone cabinet, leg extension pan, in-use and arrival lights, lighted buttons, special car heights and construction.